Telnet from real lab router to GNS3 router?

Mahdi,
I have a similar problem that I can access from GNS3 Lab router to a real router which is 3 hops away from GNS3 lab router. But I cannot telnet from a real router to GNS3 router.

Can you telnet from your CA server to GNS3 router?

If you can could you please let me know how did you configure your PC and build the bridge from GNS3 lab router to real lab router.

I am able to telnet from my PC to GNS3 router and from GNS routers to any device on my real network, but not from my real network to GNS3 router; therefore my ACS server in my real lab is not able to communicate with GNS lab routers or ASA.

You may have the same issue.

Best Regards.
______________________
Adil S Pasha

On Aug 8, 2010, at 3:06 PM, Mahdi Elghafri wrote:

> hi group
>
> am using IE Vol 1 for Security .. my hardware emulated using Dynamips/PEMU
>
> i have connected a real PC that has win server 2003 to act as a CA server...
> however, when i try to get the CA Certificate on the PIX.. i get no response
> from the CA
>
> i searched on the internet and found that i have to install an add-on to
> enable the scep on win2k3 ... "cepsetup.exe" specifically...
>
> still.. the pix firewall and so the IOS cannot get any response from the
> CA... i did packet capture.. found that the pix issue this http command:
>
> GET /certserv/mscep/mscep.dll/operation=GetCACert message=XXXX
>
> however, the response from the server is simply a 404 error.. which is file
> not found...
>
> did anybody experienced the same problem before? or did anybody successfuly
> managed to work on dynamips and solve the vol 1 labs
>
> please help
>
>
> --
> Mahdi A. Elghafri
> Network Consultant/Instructor
>
> B.Sc, CCIE# 22416R&S, CCSI

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 09 2010 - 18:35:26 ART