RE: win2k3 scep problem

Mahdi,

> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> Behalf Of Mahdi Elghafri
> Sent: Sunday, August 08, 2010 3:07 PM
> To: Cisco certification; Cisco certification
> Subject: win2k3 scep problem
>
> hi group
>
> am using IE Vol 1 for Security .. my hardware emulated using
> Dynamips/PEMU
>
> i have connected a real PC that has win server 2003 to act as a CA server...
> however, when i try to get the CA Certificate on the PIX.. i get no response
> from the CA
>
> i searched on the internet and found that i have to install an add-on to
> enable the scep on win2k3 ... "cepsetup.exe" specifically...
>
> still.. the pix firewall and so the IOS cannot get any response from the CA... i
> did packet capture.. found that the pix issue this http command:
>
> GET /certserv/mscep/mscep.dll/operation=GetCACert message=XXXX
>
> however, the response from the server is simply a 404 error.. which is file not
> found...
>
> did anybody experienced the same problem before? or did anybody
> successfuly managed to work on dynamips and solve the vol 1 labs
>

Do you have IIS properly configured on the CA and is your CRL being published.

Might want to check out this link as well:

http://www.microsoft.com/downloads/details.aspx?familyid=9f306763-d036-41d8-8860-1636411b2d01&displaylang=en#AdditionalInfo

-ryan

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 08 2010 - 19:21:01 ART