Re: Save Config in Router

Just type "n" at the confirm prompt and it should not erase then copy.

On Aug 7, 2010 11:15 AM, "Edward John" <edwardjohn2020_at_googlemail.com>
wrote:

Space is available,..

R2#copy running-config flas
R2#copy running-config flash:
Destination filename [running-config]?
Erase flash: before copying? [confirm]

R2#show version | include (cisco|ima)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
System image file is "flash:c2600-is-mz.122-11.T11.bin"
cisco 2621XM (MPC860P) processor (revision 0x100) with 59392K/6144K bytes of
memory.
Primary Rate ISDN software, Version 1.1.

R2#show flash:

System flash directory:
File Length Name/status
 1 14116152 c2600-is-mz.122-11.T11.bin
[14116216 bytes used, 2136712 available, 16252928 total]
16384K bytes of processor board System flash (Read/Write)

Rgds,
John

Blogs and organic groups at http://www.ccie.net

_____________________________________...

Blogs and organic groups at http://www.ccie.net
Received on Sat Aug 07 2010 - 11:18:45 ART