3 lines EEM

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper0900aecd805457c3.html

3 lines EEM

event manager applet myapplet
 event cli pattern "conf t" sync no skip no
 action 1.0 syslog msg "Configuration by Authorized Personnel ONLY"

I try in GNS using 3600, 3750 and 7200
None working ....

Can anyone help ?
thanks

Router(config-applet)#action 1.0 sys
Router(config-applet)#$ "Configuration by Authorized Personnel ONLY"

Router(config-applet)#end
Router#
*Mar 1 00:03:51.479: %SYS-5-CONFIG_I: Configured from console by console
Router#
Router#debug eve man all
All possible Embedded Event Manager debugging has been turned on
Router#
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
*Mar 1 00:04:06.691: cli_history_entry_add: free_hist_list size=0,
hist_list size=7
*Mar 1 00:04:06.691: check_eem_cli_policy_handler: command_string=configure
terminal
*Mar 1 00:04:06.691: check_eem_cli_policy_handler: num_matches = 0,
response_code = 1
Router(config)#
Router(config)#do sh run | b even

*Mar 1 00:04:37.263: cli_history_entry_add: free_hist_list size=0,
hist_list size=7
*Mar 1 00:04:37.263: check_eem_cli_policy_handler: command_string=do sh run
| b even
*Mar 1 00:04:37.263: check_eem_cli_policy_handler: num_matches = 0,
response_code = 1
*Mar 1 00:04:37.283: cli_history_entry_add: free_hist_list size=0,
hist_list size=7
*Mar 1 00:04:37.283: check_eem_cli_policy_handler: command_string=show
running-config
*Mar 1 00:04:37.283: check_eem_cli_policy_handler: num_matches = 0,
response_code = 1event manager applet myapplet
 event cli pattern "conf t" sync no skip no
 action 1.0 syslog msg "Configuration by Authorized Personnel ONLY"
!
end

Router(config)#
*Mar 1 00:05:00.003: fh_fd_timer_process_async
*Mar 1 00:05:00.003: cron_tick: num_matches 0$syslog msg "Configuration by
Auth
Router(config)#

Blogs and organic groups at http://www.ccie.net
Received on Sat Aug 07 2010 - 16:50:30 ART