RE: Not able to copy a file using http when client and server

Hi Jack,
Thanks a lot for your help.

I found that it works only when I configure default username and
password on the client. It does not work when I give username and
password in the cli.

Have a look at this:

R2# copy http://cisco:cisco@102.1.1.1 disk2:
Source filename []? lab1
Destination filename [lab1]?
%Warning:There is a file already existing with this name
Do you want to over write? [confirm]
%Error opening http://*****:*****@102.1.1.1/lab1 (Permission denied)
R2#

R2# copy http://102.1.1.1 disk2:
Address or name of remote host [102.1.1.1]?
Source filename [lab1]?
Destination filename [lab1]?
%Warning:There is a file already existing with this name
Do you want to over write? [confirm]
Loading http://102.1.1.1/lab1
3146 bytes copied in 0.364 secs (8643 bytes/sec)
R2#
R2#

Thanks,
Sonu

-----Original Message-----
From: Jack Router [mailto:pan.router_at_gmail.com]
Sent: Wednesday, August 04, 2010 8:43 AM
To: Sonu Khandelwal (sokhande); 'Group Study'
Subject: RE: Not able to copy a file using http when client and server
are routers

Try this on R2 before copying files.

ip http client username cisco
ip http client password cisco

Here is my config on R1:

ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
username cisco privilege 15 password 0 cisco

It works for me.

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Sonu Khandelwal (sokhande)
Sent: 3-Aug-10 22:17
To: Group Study
Subject: Not able to copy a file using http when client and server are
routers

Hi All,
I have simple topology like this:

R1----R2

R1 is acting as a http server and R2 is acting as a http client. I see
when I try to copy a file from R2 to R1, it says (Permission denied) on
R2. While At R1 it says authentication failed. Can you please help me?

R1#sh run | i http
ip http server
ip http authentication local
no ip http secure-server
R1#sh run | i username
username cisco privilege 15 password 0 cisco R1#

R1#dir
Directory of disk2:/

    1 -rw- 44447288 Oct 28 2009 18:36:32 +00:00
c7200-adventerprisek9-mz
    2 -rw- 1758 Oct 28 2009 22:16:18 +00:00 basic_config
    3 -rw- 2659 Oct 31 2009 23:09:42 +00:00 lab2config
    4 -rw- 3627 Nov 8 2009 02:28:32 +00:00 lab3
    5 -rw- 2771 Dec 20 2009 08:19:32 +00:00 lab14
    6 -rw- 3146 Jan 12 2010 00:15:00 +00:00 lab1
    7 -rw- 1634 Feb 3 2010 03:49:54 +00:00 copy

127893504 bytes total (83419136 bytes free) R1#

R2#copy http://cisco:cisco@102.1.1.1 disk2:
Address or name of remote host [102.1.1.1]?
Source filename [disk2:/lab14]?
Destination filename [lab14]?
%Warning:There is a file already existing with this name Do you want to
over write? [confirm] %Error opening
http://*****:*****@102.1.1.1/disk2:/lab14 (Permission
denied)

At R1 I see these debugs:

*Aug 3 17:35:16.362: its_urlhook url: /disk2:/lab14, method 1 *Aug 3
17:35:16.362: lds_urlhook, url=/disk2:/lab14 *Aug 3 17:35:16.362: Tue,
03 Aug 2010 17:35:16 GMT 102.1.1.2
/disk2:/lab14 auth_required
        Protocol = HTTP/1.1 Method = GET
*Aug 3 17:35:16.362: Date = Tue, 03 Aug 2010 17:35:05 GMT

*Aug 3 17:35:16.366: its_urlhook url: /disk2:/lab14, method 1 *Aug 3
17:35:16.366: lds_urlhook, url=/disk2:/lab14 *Aug 3 17:35:16.366: HTTP:
Authentication failed for realm level_15 or view_access *Aug 3
17:35:16.366: HTTP: Authentication failed for level 15 R1# *Aug 3
17:35:18.366: Tue, 03 Aug 2010 17:35:18 GMT 102.1.1.2
/disk2:/lab14 auth_failed
        Protocol = HTTP/1.1 Method = GET
*Aug 3 17:35:18.366: Date = Tue, 03 Aug 2010 17:35:05 GMT

Thanks,
Sonu

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 04 2010 - 12:51:15 ART