Re: What is the meaning of : Process 100, Nbr 10.0.0.3 on

 Yes, please, issue a debug followed by clear ip ospf proc and show us the
output

2010/7/8 Alessandro Braga <sandro.unix_at_gmail.com>

> Taufik,
>
> enable debug in router with command 'debug ip ospf adj' and see the output.
>
> Regards,
> Alessandro Braga
>
> 2010/7/8 Taufik Kurniawan <ktaufik_at_gmail.com>
>
> > Thanks all,
> > I will check your inputs.
> >
> > In the meantime, here is the complete configs.
> >
> > cheers,
> > taufik
> >
> > R1
> >
> > R1#sh conf
> > Using 1429 out of 29688 bytes
> > !
> > version 12.4
> > service timestamps debug datetime msec
> > service timestamps log datetime msec
> > no service password-encryption
> > !
> > hostname R1
> > !
> > boot-start-marker
> > boot-end-marker
> > !
> > !
> > no aaa new-model
> > memory-size iomem 15
> > ip cef
> > !
> > !
> > !
> > !
> > !
> > multilink bundle-name authenticated
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > archive
> > log config
> > hidekeys
> > !
> > !
> > crypto isakmp policy 1
> > encr 3des
> > hash md5
> > authentication pre-share
> > group 5
> > lifetime 4000
> > crypto isakmp key kunci address 10.0.0.0 255.255.255.248
> > !
> > !
> > crypto ipsec transform-set transet ah-md5-hmac esp-3des esp-sha-hmac
> > comp-lzs
> > !
> > crypto map mymap 1 ipsec-isakmp
> > set peer 10.0.0.2
> > set peer 10.0.0.3
> > set peer 10.0.0.4
> > set transform-set transet
> > match address 100
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 202.155.10.1 255.255.255.0
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface FastEthernet0
> > ip address 10.0.0.1 255.255.255.0
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 kunciospf
> > ip ospf cost 1
> > ip ospf priority 101
> > speed auto
> > crypto map mymap
> > !
> > router ospf 100
> > log-adjacency-changes
> > area 0 authentication message-digest
> > network 10.0.0.0 0.0.0.255 area 0
> > network 202.155.10.0 0.0.0.255 area 1
> > !
> > !
> > access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> >
> >
> > R2
> > crypto isakmp policy 1
> > encr 3des
> > hash md5
> > authentication pre-share
> > group 5
> > lifetime 4000
> > crypto isakmp key kunci address 10.0.0.1
> > !
> > !
> > crypto ipsec transform-set transet ah-md5-hmac esp-3des esp-sha-hmac
> > comp-lzs
> > !
> > crypto map mymap 1 ipsec-isakmp
> > set peer 10.0.0.1
> > set transform-set transet
> > match address 100
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 202.155.20.1 255.255.255.0
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface FastEthernet0
> > ip address 10.0.0.2 255.255.255.0
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 kunciospf
> > ip ospf cost 2
> > ip ospf priority 102
> > speed auto
> > crypto map mymap
> > !
> > router ospf 100
> > log-adjacency-changes
> > area 0 authentication message-digest
> > network 10.0.0.0 0.0.0.255 area 0
> > network 202.155.20.0 0.0.0.255 area 2
> > !
> > access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> > !
> >
> > R3
> >
> > !
> > crypto isakmp policy 1
> > encr 3des
> > hash md5
> > authentication pre-share
> > group 5
> > lifetime 6000
> > crypto isakmp key kunci address 10.0.0.1
> > !
> > !
> > crypto ipsec transform-set transet esp-3des esp-sha-hmac comp-lzs
> > !
> > crypto map mymap 1 ipsec-isakmp
> > set peer 10.0.0.1
> > set transform-set transet
> > match address 100
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 202.155.30.1 255.255.255.0
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface FastEthernet0
> > ip address 10.0.0.3 255.255.255.0
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 kunciospf
> > ip ospf cost 3
> > ip ospf priority 103
> > speed auto
> > crypto map mymap
> > !
> > router ospf 100
> > log-adjacency-changes
> > area 0 authentication message-digest
> > network 10.0.0.0 0.0.0.255 area 0
> > network 202.155.30.0 0.0.0.255 area 3
> > !
> > !
> > access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> > !
> >
> > R4
> >
> > !
> > crypto isakmp policy 1
> > encr 3des
> > hash md5
> > authentication pre-share
> > group 5
> > lifetime 2000
> > crypto isakmp key kunci address 10.0.0.1
> > !
> > !
> > crypto ipsec transform-set transet ah-md5-hmac esp-3des esp-sha-hmac
> > comp-lzs
> > !
> > crypto map mymap 1 ipsec-isakmp
> > set peer 10.0.0.1
> > set transform-set transet
> > match address 100
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > interface Loopback0
> > ip address 202.155.40.1 255.255.255.0
> > ip ospf 100 area 4
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface FastEthernet0
> > ip address 10.0.0.4 255.255.255.0
> > ip ospf authentication message-digest
> > ip ospf message-digest-key 1 md5 kunciospf
> > ip ospf cost 4
> > ip ospf priority 104
> > ip ospf 100 area 0
> > speed auto
> > crypto map mymap
> > !
> > router ospf 100
> > log-adjacency-changes
> > area 0 authentication message-digest
> > !
> > !
> > access-list 100 permit ip 10.0.0.0 0.0.0.255 10.0.0.0 0.0.0.255
> > !
> >
> >
> >
> >
> >
> >
> > On 8 July 2010 12:54, Taufik Kurniawan <ktaufik_at_gmail.com> wrote:
> >
> > > R1, R2, R3, R4 ospf in their f0
> > >
> > > R1 and R2 is ok, but when i start R3 ... it is ok for sometime .. then
> R3
> > > disconnected.
> > > It happen also when i try to activate R4 ...
> > >
> > > What am I missing here ? ... sorry newbie ospf :)
> > >
> > > R1.
> > >
> > > interface Loopback0
> > > ip address 202.155.10.1 255.255.255.0
> > > !
> > > interface Ethernet0
> > > no ip address
> > > shutdown
> > > half-duplex
> > > !
> > > interface FastEthernet0
> > > ip address 10.0.0.1 255.255.255.0
> > > ip ospf authentication message-digest
> > > ip ospf message-digest-key 1 md5 kunciospf
> > > ip ospf cost 1
> > > ip ospf priority 101
> > > speed auto
> > > crypto map mymap
> > > !
> > > router ospf 100
> > > log-adjacency-changes
> > > area 0 authentication message-digest
> > > network 10.0.0.0 0.0.0.255 area 0
> > > network 202.155.10.0 0.0.0.255 area 1
> > >
> > >
> > > R2.
> > >
> > > interface Loopback0
> > > ip address 202.155.20.1 255.255.255.0
> > > !
> > > interface Ethernet0
> > > no ip address
> > > shutdown
> > > half-duplex
> > > !
> > > interface FastEthernet0
> > > ip address 10.0.0.2 255.255.255.0
> > > ip ospf authentication message-digest
> > > ip ospf message-digest-key 1 md5 kunciospf
> > > ip ospf cost 2
> > > ip ospf priority 102
> > > speed auto
> > > crypto map mymap
> > > !
> > > router ospf 100
> > > log-adjacency-changes
> > > area 0 authentication message-digest
> > > network 10.0.0.0 0.0.0.255 area 0
> > > network 202.155.20.0 0.0.0.255 area 2
> > >
> > >
> > > R3 and R4 just typical like R2
> > >
> > >
> > > thanks for help.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 08 2010 - 10:48:44 ART