OT

Please can somebody run this for me in the output interpreter.
Thanks in advance

Vlan300 is up, line protocol is up

  Hardware is EtherSVI, address is 0023.3368.ccc0 (bia 0023.3368.ccc0)

  Internet address is

  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

     reliability 255/255, txload 255/255, rxload 98/255

  Encapsulation ARPA, loopback not set

  Keepalive not supported

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:00, output 00:00:00, output hang never

  Last clearing of "show interface" counters 1y0w

  Input queue: 0/75/6555326/1999617 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 386610000 bits/sec, 202768 packets/sec

  5 minute output rate 1462596000 bits/sec, 207904 packets/sec

  L2 Switched: ucast:

494296938 pkt, 89467151678 bytes - mcast: 11699033 pkt, 5575372814 bytes

  L3 in Switched: ucast: 3701744074155 pkt, 944530610551777 bytes - mcast: 0 pkt, 0 bytes mcast

  L3 out Switched: ucast: 4260376863762 pkt, 3608306850088730 bytes mcast: 0 pkt, 0 bytes

     3702838654248 packets input, 944659883791471 bytes, 0 no buffer

     Received 11698952 broadcasts (0 IP multicasts)

     0 runts, 0 giants, 35855 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

     4260636092925 packets output, 3608282513102539 bytes, 0 underruns

     0 output errors, 0 interface resets

     0 output buffer failures, 0 output buffers swapped out

from my BlackBerry.

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 16 2010 - 21:01:37 ART