Re: OSPF over PPPoE

Yeah, this must resolve the issue. Thanks Muhammad for reminding it.

On Fri, Jul 16, 2010 at 8:32 PM, Muhammad Anser Khan
<manserkhan_at_gmail.com>wrote:

> You need to define on R1-SERVER under interface Virtual-Tem 12
>
> "peer default ip address dhcp-pool ADSL "
>
> Regards,
> Anser
>
> On Fri, Jul 16, 2010 at 5:34 PM, mpls protocol <mplsprotocol_at_gmail.com
> >wrote:
>
> > Hi All Expert,
> >
> > I am doing practice in GNS. I am using net file from h***://
> > ccie18473.net/dynamips/dynamips.htm ( PPPoE: Old Method with DHCP and
> > VRF )<http://ccie18473.net/dynamips/dynamips.htm#pppoe-old-dhcp-vrf>
> >
> > try to run ospf on R1 -->> R2 receiving route from R1 to R2. R2 is not
> > receiving from R1
> >
> > Please help me what i am missing here.
> >
> > Base config is as below:
> >
> > =============================
> >
> > !
> > hostname R1-SERVER
> > !
> > !
> > !
> > aaa authentication ppp ADSL local
> > aaa session-id common
> > ip subnet-zero
> > !
> > !
> > no ip domain lookup
> > ip dhcp excluded-address 10.0.12.2 10.0.12.254
> > !
> > ip dhcp pool ADSL
> > network 10.0.12.0 255.255.255.0
> > !
> > ip vrf TST
> > rd 1:12
> > route-target export 1:12
> > route-target import 1:12
> > !
> > ip cef
> > vpdn enable
> > !
> > vpdn-group ADSL
> > accept-dialin
> > protocol pppoe
> > virtual-template 12
> > !
> > !
> > username CCIE password 0 CISCO
> > !
> > !
> > interface Loopback199
> > ip vrf forwarding TST
> > ip address 199.0.2.1 255.255.255.0 secondary
> > ip address 199.0.3.1 255.255.255.0 secondary
> > ip address 199.0.1.1 255.255.255.0
> > !
> > interface FastEthernet0/0
> > ip vrf forwarding TST
> > ip address 10.0.12.2 255.255.255.0
> > speed 100
> > full-duplex
> > pppoe enable
> > !
> > !
> > interface Virtual-Template12
> > ip vrf forwarding TST
> > ip unnumbered FastEthernet0/0
> > no peer default ip address
> > ppp authentication chap ADSL
> > !
> > router ospf 100 vrf TST
> > log-adjacency-changes
> > network 10.0.12.2 0.0.0.0 area 0
> > network 199.0.1.1 0.0.0.0 area 0
> > network 199.0.2.1 0.0.0.0 area 0
> > network 199.0.3.1 0.0.0.0 area 0
> > !
> > =======================
> >
> > R1-SERVER#sh ip route vrf TST
> >
> > Gateway of last resort is not set
> >
> > C 199.0.3.0/24 is directly connected, Loopback199
> > C 199.0.2.0/24 is directly connected, Loopback199
> > C 199.0.1.0/24 is directly connected, Loopback199
> > 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> > C 10.0.12.0/24 is directly connected, FastEthernet0/0
> > C 10.0.12.1/32 is directly connected, Virtual-Access1.1
> > 192.168.1.0/32 is subnetted, 1 subnets
> > O 192.168.1.254 [110/2] via 10.0.12.1, 00:09:18, Virtual-Access1.1
> > O 192.168.2.0/24 [110/2] via 10.0.12.1, 00:09:18, Virtual-Access1.1
> > O 192.168.3.0/24 [110/2] via 10.0.12.1, 00:09:18, Virtual-Access1.1
> > R1-SERVER#
> >
> > R1-SERVER#sh ver | i IOS
> > IOS (tm) 2600 Software (C2691-JSX-M), Version 12.3(26), RELEASE SOFTWARE
> > (fc2)
> > R1-SERVER#
> > =======================================
> > !
> > hostname R2-CLIENT
> > !
> > !
> > no ip domain lookup
> > !
> > ip cef
> > vpdn enable
> > !
> > vpdn-group ADSL
> > request-dialin
> > protocol pppoe
> > !
> > !
> > interface Loopback192
> > ip address 192.168.2.254 255.255.255.0 secondary
> > ip address 192.168.3.254 255.255.255.0 secondary
> > ip address 192.168.1.254 255.255.255.0
> > !
> > interface FastEthernet0/0
> > no ip address
> > speed 100
> > full-duplex
> > pppoe enable
> > pppoe-client dial-pool-number 1
> > !
> > !
> > interface Dialer1
> > ip address dhcp
> > ip mtu 1492
> > encapsulation ppp
> > dialer pool 1
> > ppp chap hostname CCIE
> > ppp chap password 0 CISCO
> > !
> > router ospf 100
> > log-adjacency-changes
> > network 10.0.12.1 0.0.0.0 area 0
> > network 192.168.1.254 0.0.0.0 area 0
> > network 192.168.2.254 0.0.0.0 area 0
> > network 192.168.3.254 0.0.0.0 area 0
> > !
> >
> > =======================
> >
> > R2-CLIENT#sh ip route
> >
> > Gateway of last resort is not set
> >
> > 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> > C 10.0.12.2/32 is directly connected, Dialer1
> > C 10.0.12.0/24 is directly connected, Dialer1
> > C 192.168.1.0/24 is directly connected, Loopback192
> > C 192.168.2.0/24 is directly connected, Loopback192
> > C 192.168.3.0/24 is directly connected, Loopback192
> >
> > R2-CLIENT#sh ver | i IOS
> > IOS (tm) 2600 Software (C2691-JSX-M), Version 12.3(26), RELEASE SOFTWARE
> > (fc2)
> > R2-CLIENT#
> > ========================
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Thanks & Regards,
Vivek Vidhate.
Blogs and organic groups at http://www.ccie.net