Hello,
I am running spanning tree using portfast with bdpu gaurd. I have run into what I believe is a problem. I have a port that is configure with portfast and bdpu-uard. I have a pbx avaya switch connected to the port sending bdpu's but the port doesn't shutdown like it should? Any thoughts?
spanning-tree mode rapid-pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
spanning-tree extend system-id
Switch is in rapid-pvst mode
Root bridge for: VLAN0001-VLAN0002, VLAN0010-VLAN0012, VLAN0014-VLAN0016
VLAN0018-VLAN0024, VLAN0030-VLAN0031, VLAN0034-VLAN0036, VLAN0046, VLAN0052
VLAN0057, VLAN0070, VLAN0080, VLAN0090, VLAN0092-VLAN0093, VLAN0095-VLAN009
VLAN0099-VLAN0100, VLAN0122, VLAN0135, VLAN0170, VLAN0175, VLAN0210
VLAN0223, VLAN0227-VLAN0228, VLAN0230, VLAN0232-VLAN0233, VLAN0235-VLAN0237
VLAN0300, VLAN0500-VLAN0506, VLAN0610, VLAN0650, VLAN0700, VLAN0750-VLAN075
VLAN0801, VLAN0811, VLAN0820, VLAN0895-VLAN0897, VLAN0900
Extended system ID is enabled
Portfast Default is disabled
PortFast BPDU Guard Default is enabled
Portfast BPDU Filter Default is disabled
Loopguard Default is enabled
EtherChannel misconfig guard is enabled
UplinkFast is disabled
BackboneFast is disabled
Configured Pathcost method used is short
Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 14 2010 - 10:55:25 ART
This archive was generated by hypermail 2.2.0 : Sun Aug 01 2010 - 19:19:15 ART