Hi all,
Has anyone seen this error before?
*Apr 13 16:45:51.715: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a
global identfier already present in the list of currently handled calls. It
is being refused.
Cisco GW (7200) is connected to an Ericsson PBX via E1 QSIG. Call is
originating from an Avaya phone via H323 destined to a voice mail hooked up
to the Ericsson PBX.
The rest of the debug is as follows:
*Apr 13 16:45:41.714: ISDN Se1/0:15 Q931: Applying typeplan for sw-type 0x16
is 0x2 0x1, Calling num 1234
*Apr 13 16:45:41.714: ISDN Se1/0:15 Q931: Applying typeplan for sw-type 0x16
is 0x0 0x0, Called num 5678
*Apr 13 16:45:41.714: ISDN Se1/0:15 Q931: TX -> SETUP pd = 8 callref =
0x00A2
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Facility i =
0x9FAA06800100820100A113020118020100800B4176617961203435373030
Display i = 'John'
Calling Party Number i = 0x2180, '1234'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '5678'
Plan:Unknown, Type:Unknown
*Apr 13 16:45:41.802: ISDN Se1/0:15 Q931: RX <- SETUP_ACK pd = 8 callref =
0x80A2
Channel ID i = 0xA98381
Exclusive, Channel 1
*Apr 13 16:45:41.822: ISDN Se1/0:15 Q931: RX <- CALL_PROC pd = 8 callref =
0x80A2
Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have in-band
info
*Apr 13 16:45:41.826: ISDN Se1/0:15 Q931: RX <- PROGRESS pd = 8 callref =
0x80A2
Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have in-band
info
*Apr 13 16:45:41.922: ISDN Se1/0:15 Q931: RX <- FACILITY pd = 8 callref =
0x80A2
Facility i =
0x9FAA06800100820100A164020101020113305C0A0101300BA5090A0104120437373939020101400504039090A3A10DA00BA5090A0100120436323039820102A411A00FA10A0A0102120534353730300A0101A50D800B4176617961203435373030A70C800A4D6F64656C204E6F6465
*Apr 13 16:45:41.922: ISDN Se1/0:15 **ERROR**: isdn_init_fac_data: No Opval
0
*Apr 13 16:45:51.659: ISDN Se1/0:15 Q931: RX <- DISCONNECT pd = 8 callref =
0x80A2
Cause i = 0x8190 - Normal call clearing
*Apr 13 16:45:51.663: ISDN Se1/0:15 Q931: TX -> RELEASE pd = 8 callref =
0x00A2
*Apr 13 16:45:51.695: ISDN Se1/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref
= 0x80A2
*Apr 13 16:45:51.715: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a
global identfier already present in the list of currently handled calls. It
is being refused.
Cheers,
Emir
Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 01 2010 - 15:14:45 ART
This archive was generated by hypermail 2.2.0 : Sun Aug 01 2010 - 19:19:15 ART