neither Cbarge button show up nor call status change to "remote

Hi guys,

I faced wired issue. I tried to configure cbarge feature on CUCME 7.0 but
couldn't make the phone goes into "remtoe in use" status. Also cbarge button
does not show up when call connected on share line on the other parties.

ephone-template 5
 softkeys remote-in-use CBarge Newcall
 softkeys hold Resume Newcall Join
 softkeys connected TrnsfVM Park Acct ConfList Confrn Endcall Trnsfer Hold

ephone-dn 1 dual-line
 number 4001
  name BR2PH1
ephone-dn 2
 number 4002
  name BR2PH2
ephone-dn 3
 number 4003
 name BR2PH3
ephone-dn 13 octo-line
 number 4009
 name Shared line
ephone 1
 device-security-mode none
 mac-address 000C.29B6.6BFC
 ephone-template 5
 type CIPC
 button 1:1 6:13
ephone 2
 device-security-mode none
 mac-address 000C.29F9.A7F2
 ephone-template 5
 type CIPC
 button 1:2 6:13
ephone 3
 device-security-mode none
 mac-address 000C.298A.DC67
 ephone-template 5
 type CIPC
 button 1:3 6:13

Am I miss anything here?

I know that cbarge will not work without CFbridge configured on the cme. I
expect that cbarge button show up though.

Cheers,

Jeremy

Blogs and organic groups at http://www.ccie.net
Received on Wed Jun 30 2010 - 17:40:37 ART