Re: Adaptive Shaping

Yes and the end that receives the q922 frames will adapt if it's configured
to do so.

On Mon, Jun 28, 2010 at 12:49 PM, Muzammil Malick <malickmuz_at_gmail.com>wrote:

> Hi Narbik
>
> If the *traffic-shape fecn-adapt* command is configured at both ends of
> the link, the far end will reflect received FECNs as BECNs in Q.922 TEST
> RESPONSE messages.
>
> Does this mean the remote end will send back a dummy frame with a BECN
> attached, although under normal circumstances it would never need to send
> traffic to the source?
>
> Thanks
>
> On 28 June 2010 20:44, Narbik Kocharians <narbikk_at_gmail.com> wrote:
>
>> You can do "Fecn-adapt" , that will take care of it.
>>
>> On Mon, Jun 28, 2010 at 12:34 PM, Muzammil Malick <malickmuz_at_gmail.com>wrote:
>>
>>> Hi
>>>
>>> Regarding FECN and BECN
>>>
>>> I read something a while back about UDP flows that are sent across a FR
>>> cloud that do not need acknowledgement.
>>> So the remote end has no way of responding with a BECN even if the
>>> service
>>> provider was to mark frames with FECN.
>>> Does his mean that there is no way to signal the sender to slow down in
>>> this
>>> case?
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>> --
>> Narbik Kocharians
>> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
>> www.MicronicsTraining.com <http://www.micronicstraining.com/>
>> Sr. Technical Instructor
>> YES! We take Cisco Learning Credits!
>> Training And Remote Racks available
>>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net