Sorry, I misread the version that you were running.
If you're running a 12.4 mainline, there are a lot less options available for actions when compared to a later 12.4T version.
If you turn on "debug event manager all" with logging enabled, do you see the device run the command internally?
As an additional method of output in the earlier 12.4 mainline versions, you can also test sending the output as a syslog msg. (Tested on 12.4(10) )
action 2.0 syslog msg "$_cli_result"
Regards,
Marvin Greenlee
----- Original Message -----
From: "ccie.unnumbered" >;ccie.unnumbered_at_gmail.com
Blogs and organic groups at http://www.ccie.net
Received on Sun Jun 20 2010 - 11:22:10 ART
This archive was generated by hypermail 2.2.0 : Sun Aug 01 2010 - 09:11:37 ART