Re: lab equipment

I dont see how you can fail the lab if its 1T or 2T. Only if you are
cramming you need to know the interface tuple.
Else see the diagram & type in the interface number !!

On Mon, Jun 14, 2010 at 1:29 PM, Faisal Ilyas <faisal.learning_at_gmail.com>wrote:

> Bellet ...
>
> Hardware never matters in CCIE lab, Cisco Certified Internetwork Expert
> highlight Expert in Internetworking technologies not in hardware, as i am
> not yet ccie then i have no issue for NDA as i havent signed it yet ... :D
> ... I came to know that sometimes in exam they got all 4 3560 or sometimes
> 3750 switches in the lab and sometimes the backbone is also shared and you
> were thinking that you were connected directly to the backbone ...
>
> so, if you involve yourself into the complexity of hardware then my friend
> you cant be CCIE as the whole exam is IOS features dependent rather then
> hardware ...
>
> let me give you one more example, i have seen in some switches by default
> the ports are in dynamic desirable while in some dynamic auto, if you didnt
> know the proper understanding of dynamic ports then you can fail but you
> can
> survive if you know about it rather then on which type of hardware it is
> running.
>
>
> Regards,
> M. Faisal.
>
> On Sun, Jun 13, 2010 at 8:24 PM, belletjetrekken
> <belletjetrekken_at_gmail.com>wrote:
>
> > WIC-1T's show up like
> > s0/1/0
> > s0/2/0
> >
> > WIC-2T's show up like
> > s0/0/0
> > s0/0/1
> >
> > There is a difference. I want to get used to entering the right
> interface.
> > I don't want to practice what is not in the lab. You never know, it
> might
> > cause me to fail. I will need every minute and every little point. I
> > don't
> > want to risk entering the wrong interface and end up spending a long time
> > troubleshooting.
> >
> >
> > On Sun, Jun 13, 2010 at 12:13 PM, GAURAV MADAN <
> gauravmadan1177_at_gmail.com
> > >wrote:
> >
> > > How does that matter to you ?
> > > The diagrams will indicate you the app. Serial interface ?
> > >
> > > Gaurav Madan
> > > CCIE
> > >
> > > On Sun, Jun 13, 2010 at 10:08 PM, belletjetrekken
> > > <belletjetrekken_at_gmail.com> wrote:
> > > > Are they using WIC-1T's or WIC-2T's in the lab?
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Regards,
> M. Faisal.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 14 2010 - 14:02:30 ART