Re: switchport question

As it is operating in trunk mode, remove switchport access vlan 40, and
spanning-tree portfast edge command, these command should not be in the port
which is in trunk mode. you would probably see some maulfaunctioning
behabiour of this port once this port flactuate.

On Fri, Jun 11, 2010 at 8:21 AM, Naufal Jamal <naufalccie_at_yahoo.in> wrote:

> Hi Folks,
>
> I was having a look on one of the production switches last day. and saw the
> below config. I m trying to understand why the port is configured for both
> access and trunk mode.what purpose is it serving or is it just a mistake..
>
> Building configuration...
> Current configuration : 215 bytes
> !
> interface GigabitEthernet1/6/6
> description **Rack C Chasis 1 blade 4,5,6,7**
> switchport
> switchport access vlan 40
> switchport trunk encapsulation dot1q
> switchport mode trunk
> spanning-tree portfast edge
> end
>
> TXU-VSS-A#sh interface g1/6/6 switch
> Name: Gi1/6/6
> Switchport: Enabled
> Administrative Mode: trunk
> Operational Mode: trunk
> Administrative Trunking Encapsulation: dot1q
> Operational Trunking Encapsulation: dot1q
> Negotiation of Trunking: On
> Access Mode VLAN: 40 (Non_PRD)
> Trunking Native Mode VLAN: 1 (default)
> Administrative Native VLAN tagging: enabled
> Operational Native VLAN tagging: disabled
> Voice VLAN: none
> Administrative private-vlan host-association: none
> Administrative private-vlan mapping: none
> Operational private-vlan: none
> Trunking VLANs Enabled: ALL
> Pruning VLANs Enabled: 2-1001
> Capture Mode Disabled
> Capture VLANs Allowed: ALL
>
>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
Masroor Ali
Blogs and organic groups at http://www.ccie.net