Re: IPv6 Commands

From: Muzammil Malick <malickmuz_at_gmail.com>
Date: Tue, 8 Jun 2010 17:35:42 +0100

Ok, so is it recommended to read an entire command reference for your code
when preparing? Or is this over kill?

I have relied heavily con the conflagration guide when preparing and its
come up short for me in my past lab attempts
and its only now through doing workbooks that I am realising that things are
missing from the config guide that are very important.
I don't mean to say the config guide was my only source of prep, just that i
have relied on it alot.

So how does one know when they have covered all the commands necessary to
pass?

On 8 June 2010 17:29, Joe Astorino <joe_astorino_at_comcast.net> wrote:

> I would say generally no, not every single command is going to be covered
> in the configuration guide. Every single possible command that could be
> used is usually not covered in the configuration guides. That is the reason
> we have the command reference : )
>
>
> Regards,
> Joe Astorino, CCIE #24347
>
> "He not busy being born is busy dying" -- Dylan
>
> ----- Original Message -----
> From: "Muzammil Malick" <malickmuz_at_gmail.com>
> To: "Joe Astorino" <joe_astorino_at_comcast.net>
> Cc: "Cisco certification" <ccielab_at_groupstudy.com>
> Sent: Tuesday, June 8, 2010 12:21:19 PM GMT -05:00 US/Canada Eastern
> Subject: Re: IPv6 Commands
>
> Thanks Joe
>
> But this leads me to another question, is everything in the command
> reference in the configuration guide?
>
> On 8 June 2010 16:27, Joe Astorino <joe_astorino_at_comcast.net> wrote:
>
>> The DocCD is your friend : )
>>
>>
>> http://www.cisco.com/en/US/customer/docs/ios/ipv6/command/reference/ipv6_07.html#wp2191138
>>
>> Regards,
>> Joe Astorino, CCIE #24347
>>
>> "He not busy being born is busy dying" -- Dylan
>>
>>
>> ----- Original Message -----
>> From: "Muzammil Malick" <malickmuz_at_gmail.com>
>> To: "Cisco certification" <ccielab_at_groupstudy.com>
>> Sent: Tuesday, June 8, 2010 7:08:19 AM GMT -05:00 US/Canada Eastern
>> Subject: IPv6 Commands
>>
>> Hi
>>
>> Can someone please point me to he location of IPv6 commands related to
>> neighbor discovery on the Confguration Guide for 12.4T.
>> e.g
>>
>> ipv6 nd ra interval
>>
>> I cant seem to find them.
>>
>> Thanks
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 08 2010 - 17:35:42 ART

This archive was generated by hypermail 2.2.0 : Sun Aug 01 2010 - 09:11:37 ART