Hi scott,
There is same VRF configured on these R1 , R2 and R3 all interfaces .... is
there any way out for such scenario?
On Tue, Jun 8, 2010 at 12:41 AM, Tyson Scott <tscott_at_ipexpert.com> wrote:
> If these are also acting as PE then PBR will not work. Just saw your
> updated post.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> jack
> daniels
> Sent: Monday, June 07, 2010 2:06 PM
> To: Cisco certification
> Subject: Re: traffic path modification in VRF
>
> I tried PBR but it says PBR can't be applied on vrf forwarding interface
>
> On Mon, Jun 7, 2010 at 8:58 PM, jack daniels <jckdaniels12_at_gmail.com>
> wrote:
>
> > Hi guys,
> >
> > Need to your help in this policy routing in vrf-
> >
> >
> >
> R4--------------------R6------------------------------------R5
> >
> > | |
> >
> > | |
> >
> R2----------------------VRF
> > RED--------------------------R3
> >
> > | |
> >
> > | |
> > VRF RED OSPF
> > DOMAIN VRF RED
> >
> > | |
> >
> > | |
> > R1-----------------VRF
> > RED--------------------------------|
> >
> >
> >
> > NOTE - R1, R2 and R3 are routers running OSPF and all links on this
> router
> > are in VRF RED.
> > R4 and R5 are running OSPF with R2 and R3 respectively ...
> > NO VRF CONFIGURED ON R4 , R5 and R6
> >
> > R1 has two loopbacks in VRF RED - 5.5.5.1/32 and 5.5.5.2/32
> > R6 loopback is 6.6.6.6/32
> >
> > Path from
> > 1) 5.5.5.1/32 to 6.6.6.6/32 should be R1-R2-R4-R6 or R1-R3-R2-R4-R6 (any
> > will do)
> >
> > 2) 5.5.5.2/32 to 6.6.6.6/32 should be R1-R3-R5-R6 or R1-R2-R3-R5-R6
> (any
> > will do)
> >
> >
> > Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 08 2010 - 07:24:04 ART
This archive was generated by hypermail 2.2.0 : Sun Aug 01 2010 - 09:11:37 ART