RE: ASA active standby multi contexts

/agree

From: karim jamali [mailto:karim.jamali_at_gmail.com]
Sent: Monday, June 07, 2010 2:13 PM
To: Ryan West; Cisco certification
Subject: Re: ASA active standby multi contexts

Hello,

The question posed was is there a document out there
support active standby multi context mode?

It is either Active/Standby which is for single context mode, where a context
is active on one ASA and standby on the other waiting for the 1st to fail.And
there is the active/active mode which means one context active on one ASA &
the other context active on the 2nd ASA and they both backup each other. If
you want to create multiple contexts and would like to have one Active ASA for
all contexts and the other one as a backup. Create a single failover group
where one ASA is the primary and the second is secondary and tie all your
contexts to this failover group.

Best Regards,
On Mon, Jun 7, 2010 at 8:54 PM, Ryan West
<rwest_at_zyedge.com<mailto:rwest_at_zyedge.com>> wrote:
Put all your contexts on one group, it's the same as A/S at that point.

From: Fake Name [mailto:fname84_at_gmail.com<mailto:fname84_at_gmail.com>]
Sent: Monday, June 07, 2010 1:50 PM
To: Charles.Henson_at_regions.com<mailto:Charles.Henson_at_regions.com>
Cc: Cisco certification;
itguy.pro<http://itguy.pro>@gmail.com<http://gmail.com>;
nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>; Ryan
West
Subject: Re: ASA active standby multi contexts
That document referances failover of active active which you are required to
do multi context mode. The question posed was is there a document out there
support active standby multi context mode?

On Mon, Jun 7, 2010 at 1:49 PM, Fake Name
<fname84_at_gmail.com<mailto:fname84_at_gmail.com><mailto:fname84_at_gmail.com<mailto:
fname84_at_gmail.com>>> wrote:
That document referances failover of active active which you are required to
do multi context mode. The question posed was is there a document out there
support active standby multi context mode?

On Mon, Jun 7, 2010 at 1:42 PM,
<Charles.Henson_at_regions.com<mailto:Charles.Henson_at_regions.com><mailto:Charles
.Henson_at_regions.com<mailto:Charles.Henson_at_regions.com>>> wrote:
Are you looking for this?

http://www.cisco.com/en/US/products/ps6120/products_configuration_example0918
6a0080834058.shtml<http://www.cisco.com/en/US/products/ps6120/products_config
uration_example0918%0A6a0080834058.shtml>

Charles Henson

 From: Fake Name
<fname84_at_gmail.com<mailto:fname84_at_gmail.com><mailto:fname84_at_gmail.com<mailto:
fname84_at_gmail.com>>>
 To: Ryan West
<rwest_at_zyedge.com<mailto:rwest_at_zyedge.com><mailto:rwest_at_zyedge.com<mailto:rwe
st_at_zyedge.com>>>

 Cc:
"itguy.pro<http://itguy.pro><http://itguy.pro/>@gmail.com<http://gmail.com><h
ttp://gmail.com/>"
<itguy.pro<http://itguy.pro><http://itguy.pro/>@gmail.com<http://gmail.com><h
ttp://gmail.com/>>, Cisco
certification
<ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com><mailto:ccielab_at_groupst
udy.com<mailto:ccielab_at_groupstudy.com>>>

 Date: 06/07/2010 12:25 PM

 Subject: Re: ASA active standby multi contexts

Do you know of anything online I can point too? I thought it supported too
but I don't see any doucmentation.

On Mon, Jun 7, 2010 at 1:09 PM, Ryan West
<rwest_at_zyedge.com<mailto:rwest_at_zyedge.com><mailto:rwest_at_zyedge.com<mailto:rwe
st_at_zyedge.com>>> wrote:

> Multicontext supports failover just fine, you can do either A/A or A/S.
>
> > -----Original Message-----
> > From:
nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com><mailto:nobody_at_groupstudy.
com<mailto:nobody_at_groupstudy.com>>
[mailto:nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com><mailto:nobody_at_gro
upstudy.com<mailto:nobody_at_groupstudy.com>>] On
> > Behalf Of
itguy.pro<http://itguy.pro><http://itguy.pro/>@gmail.com<http://gmail.com><ht
tp://gmail.com/>
> > Sent: Monday, June 07, 2010 1:04 PM
> > To: Fake Name; Cisco certification
> > Subject: Re: ASA active standby multi contexts
> >
> > I don't think multi context supports failover configs... At least I
> couldn't set it
> > up or find any documents for 5510 model.
> > Sent via BlackBerry from T-Mobile
> >
> > -----Original Message-----
> > From: Fake Name
<fname84_at_gmail.com<mailto:fname84_at_gmail.com><mailto:fname84_at_gmail.com<mailto:
fname84_at_gmail.com>>>
> > Date: Mon, 7 Jun 2010 12:58:14
> > To: Cisco
certification<ccielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com><mailto:cc
ielab_at_groupstudy.com<mailto:ccielab_at_groupstudy.com>>>
> > Subject: ASA active standby multi contexts
> >
> > Can Anyone point me in the direction of any offical cisco documentation
> if
> > active standby and multi context mode is support on any of the asa
> models?
> >
> >
> > Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
> >
> > __________________________________________________________
> > _____________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
> >
> > __________________________________________________________
> > _____________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
Received on Mon Jun 07 2010 - 18:13:51 ART