RE: NAT with redundancy

Anbu,

> -----Original Message-----
> Sent: Monday, May 31, 2010 12:17 PM
> To: Joseph L. Brunner; Cisco certification
> Subject: Re: NAT with redundancy
>
> Thanks Joe ,
>
> i have some more to get understand regard this and expect your help ,
>
> My exact requirement is, in your example the outside global (12.207.43.148)
> should translate to 192.168.1.50 . if 192.168.1.50 is not available only it should
> be translated to 192.168.1.52.
>
> So is there any method to do the NAT with IP SLA to check 192.168.1.50 is up
> / down , then if it is down it want to translate to 192.168.1.52.
>

I don't think this is possible with NAT by default. You could write an EEM script to do that though, track the state of your IP SLA and trigger the proper CLI commands.

-ryan

Blogs and organic groups at http://www.ccie.net
Received on Mon May 31 2010 - 16:27:51 ART