Re: unable to reach VPN sites behind TE tunnel?

did some debugs...packets from R9 to R5 are getting there, but R5 to
R9 dont seem to be going anywhere.

On 5/28/10, JR Garcia <ttuner_at_gmail.com> wrote:
> topology:
>
> R5------R6-----R8------R9
>
> - TE tunnel between R5 and R8 (tunnel is up)
> - R5 and R9 are vpnv4 neighbors
>
> i see the routes in the vrf routing table on both sides, but cant ping.
> i remove the tunnel and just let the LSP set up over LDP and all is
> well. what am i missing?
>
> tunnel configs:
>
> interface Tunnel1
> ip unnumbered Loopback0
> tunnel destination 192.168.8.8
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng autoroute announce
> tunnel mpls traffic-eng path-option 1 explicit name R8
>
>
> interface Tunnel0
> ip unnumbered Loopback0
> tunnel destination 192.168.5.5
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng autoroute announce
> tunnel mpls traffic-eng path-option 1 explicit name R5

Blogs and organic groups at http://www.ccie.net
Received on Fri May 28 2010 - 19:44:56 ART