FW: CCIE SP Mini-Scenarios (New Site)

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Antonio Soares
Sent: Sunday, May 23, 2010 3:52 AM
To: 'ciprian niculescu'
Cc: 'ccie forum'; comserv_at_groupstudy.com
Subject: RE: CCIE SP Mini-Scenarios (New Site)

What i meant is related to this:

http://www.cisco.com/web/learning/le3/ccie/sp/lab_equipment.html

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares_at_netcabo.pt

  _____

From: ciprian niculescu [mailto:cnicules_at_gmail.com]
Sent: sabado, 22 de Maio de 2010 20:39
To: Antonio Soares
Cc: ccie forum; comserv_at_groupstudy.com
Subject: Re: CCIE SP Mini-Scenarios (New Site)

Thanks for the link and explanations.

What is "better" to do, use "capability vrf-lite" or manually change the tag
or manually change the domain-tag on the ospf process.
Is there any other solution?

This is for " It's also very important to know what to do when the feature
is not available ;)" :)

Regards,

Ciprian

On Fri, May 21, 2010 at 4:13 PM, Antonio Soares <amsoares_at_netcabo.pt> wrote:

When you configure the VRFs on R1 and R6, you are making them PE routers as
well. So you will need a feature to overcome the OSPF
issue:

OSPF Support for Multi-VRF on CE Routers

http://www.cisco.com/en/US/docs/ios/12_0st/12_0st21/feature/guide/ospfvrfl.h
t
ml

It's also very important to know what to do when the feature is not
available
;)

Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares_at_netcabo.pt

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
ciprian niculescu
Sent: sexta-feira, 21 de Maio de 2010 1:33
To: Antonio Soares
Cc: ccie forum; comserv_at_groupstudy.com
Subject: Re: CCIE SP Mini-Scenarios (New Site)

Thanks for the site, it's great.

But the help raised more questions, after some good playing around.

I started from the mpls-vpn topo (
http://www.ccie18473.net/dynamips2/7-mpls-vpn-1.zip), did lots of other
modifications, but in the end got one that i don't fully understand we it
don't work. The stortcut modif are:
- between R1-R2 and R5-R6 put eBGP with the same AS on R1, R6;
- put as-overide on R2+R5 for R1+R6
ok ping from R1 to R6
- add a backlink between R1-R6 (fa0/1) and run ospf on it
- shut the link R5-R6
- add a loop50 in vrf RED on R5 + redisp conn in bgp on R5
- on R1 move all interfaces into a vrf-lite IUB + the ospf and bgp peer
- on R1 redisp bgp in ospf
- on R6 move all in vrf-lite IUB (different rd than R1, but same ospf
process id) And :( on R6 i have in the DB the Loop50_R5, but not in routing
table

a debug ospf say that the route is ignored beacouse tag is equal VPN tag.

if i change the tag on R1 with a route-map at the redistribution bgp to
ospf, all is well.

What i get is that is a default looping mechanism in action, but don't
understand exactlly.

All the modifications in the net and confs can be found here, just say
import when dynamips starts.
http://dl.dropbox.com/u/272548/7-mpls-vpn-1-modif.zip

If someone can explain a little and/or point to some documentation that
explains, it is much appreciate.

Thanks,

Ciprian

P.S. little about me: i'm working on getting my first CCIE, the SP one

On Thu, May 20, 2010 at 1:24 AM, Faisal Ilyas
<faisal.learning_at_gmail.com>wrote:

> Thanks for sharing ...
>
>
>
> On Wed, May 19, 2010 at 6:44 PM, Antonio Soares <amsoares_at_netcabo.pt>
> wrote:
>
> > Hello group,
> >
> > I finally managed to transfer all my CCIE SP Videos to my homepage:
> >
> > http://www.ccie18473.net/dynamips2/dynamips2.htm
> >
> >
> > I hope this will help you.
> >
> >
> > Regards,
> >
> > Antonio Soares, CCIE #18473 (R&S/SP) amsoares_at_netcabo.pt
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Regards,
> M. Faisal.
>
> _____________________________________________________________________
> Subscription information: http://www.groupstudy.com/list/comserv.html
Received on Sun May 23 2010 - 07:12:02 ART