Re: RFC1483 Bridging

Looks like some bridging info Missing... Why are you trying to use bridge
mode than just use the 877?

I do have an 877w hooked up and I can try and replicate your problem but
that'll have to wait tomorrow... Been up for over 30 hrs :)

Have a read up on the 877 bridging config, there seems to be a lot out
there...

On Wed, May 19, 2010 at 5:32 PM, Arun Kumar Arumuganainar <
aarumuga_at_hotmail.com> wrote:

> Hi TYson,
>
> I was able to get it to work with out problems by terminate the DSL line on
> the router( WIC1-ADSL Card ). But problem happens only when DSL line
> terminates on to a modem and router gets a ethernet handoff . Here I
> am trying to establish the PPPoE over Ethernet interface.
>
> I belive this link that you have sent does not talk about the scenario - 1(
> DSL line terminating on to the router ) .
>
>
> Thanks and Regards
> Arun
>
> ------------------------------
> From: tscott_at_ipexpert.com
> To: aarumuga_at_hotmail.com; ipnish_at_gmail.com
> CC: jastorino_at_ipexpert.com; aarumuganainar_at_relianceglobalcom.com;
> ccielab_at_groupstudy.com
> Subject: RE: RFC1483 Bridging
> Date: Wed, 19 May 2010 12:25:26 -0400
>
>
> I am sorry I missed the FastEthernet interface. Why are you not using
> this as the DSL router instead of the modem if you have the ATM interface?
> I must be really out of it today to have missed these things.
>
>
>
> Here is a sample configuration for configuring the router as a DSL router.
>
>
>
>
> http://www.cisco.com/en/US/products/hw/routers/ps2167/products_configuration_example09186a0080093fcf.shtml
>
>
>
> Regards,
>
>
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
>
> Technical Instructor - IPexpert, Inc.
>
> Mailto: tscott_at_ipexpert.com
>
> Telephone: +1.810.326.1444, ext. 208
>
> Live Assistance, Please visit: www.ipexpert.com/chat
>
> eFax: +1.810.454.0130
>
>
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> training locations throughout the United States, Europe, South Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>
>
>
> *From:* Arun Kumar Arumuganainar [mailto:aarumuga_at_hotmail.com]
> *Sent:* Wednesday, May 19, 2010 12:15 PM
> *To:* tscott_at_ipexpert.com; ipnish_at_gmail.com
> *Cc:* jastorino_at_ipexpert.com; Arun Reliance; ccielab_at_groupstudy.com
> *Subject:* RE: RFC1483 Bridging
>
>
>
> HiTyson,
>
> PVC is terminating on to Modem Which sits inbetween 1841 and DSLAM
>
> Do you have the sample configs or any documents that talks about this. I
> will be interested in knowing this in bit detail.
>
> Thanks and Regards
> Arun
>
> > From: tscott_at_ipexpert.com
> > To: aarumuga_at_hotmail.com; ipnish_at_gmail.com
> > CC: jastorino_at_ipexpert.com; aarumuganainar_at_relianceglobalcom.com;
> ccielab_at_groupstudy.com
> > Subject: RE: RFC1483 Bridging
> > Date: Wed, 19 May 2010 12:11:29 -0400
> >
> > OK, looking thru your configuration.
> >
> > You need to have a pvc with the vpi/vci and under this apply
> > pppoe-client dial-pool-number 1
> >
> > You will need to find the pvc information from your provider.
> >
> >
> > Regards,
> >
> > Tyson Scott - CCIE #13513 R&S, Security, and SP
> > Technical Instructor - IPexpert, Inc.
> > Mailto: tscott_at_ipexpert.com
> > Telephone: +1.810.326.1444, ext. 208
> > Live Assistance, Please visit: www.ipexpert.com/chat
> > eFax: +1.810.454.0130
> >
> > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> > CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> > training locations throughout the United States, Europe, South Asia and
> > Australia. Be sure to visit our online communities at
> > www.ipexpert.com/communities and our public website at www.ipexpert.com
> >
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Arun
> > Kumar Arumuganainar
> > Sent: Wednesday, May 19, 2010 11:45 AM
> > To: ipnish_at_gmail.com
> > Cc: jastorino_at_ipexpert.com; Arun Reliance; ccielab_at_groupstudy.com
> > Subject: RE: RFC1483 Bridging
> >
> > Hi Nish ,
> >
> >
> >
> > THe problem I am seeing is that PPP never kicks in. Dialer is not
> initiating
> > the PPP Session because it thinks that Dialer string is not set.
> >
> >
> >
> > I understand if PPP authentication is the problem I would have got the
> PPP
> > debugs which would clearly tell me that authentiation has indeed failed.
> >
> >
> >
> > Having said that I did change the configuration and found that nothing
> > changed
> > after enabling PAP ( as per your instruction ). Moreover I stuck the
> configs
> > on the ATM interface ( WIC1-ADSL on 1841 ) , there is not problem in
> getting
> > authenticated via CHAP . I removed the bridging on Modem and applied the
> > same
> > user name and password on the MODEM , it worked absolutely fine. It
> appears
> > to
> > me that this is not a PPP issue but a dialer issue. But I could not
> figure
> > out
> > why dialer is looking for a dialer string for initiating PPP.
> >
> >
> >
> > Thanks and Regards
> >
> > Arun
> >
> > > Date: Wed, 19 May 2010 16:29:30 +0100
> > > Subject: Re: RFC1483 Bridging
> > > From: ipnish_at_gmail.com
> > > To: aarumuga_at_hotmail.com
> > > CC: jastorino_at_ipexpert.com; aarumuganainar_at_relianceglobalcom.com;
> > ccielab_at_groupstudy.com
> > >
> > > ppp authentication chap pap callin
> > > ppp chap password 7 PASSWORD
> > > ppp pap sent-username user_at_name password 7 PASSWORD
> > >
> > > Tell me whether this work please?
> > >
> > > Thanks,
> > >
> > > Regards,
> > > Nish
> > >
> > >
> > > On Wed, May 19, 2010 at 4:20 PM, Arun Kumar Arumuganainar <
> > > aarumuga_at_hotmail.com> wrote:
> > >
> > > > Hi Jose,
> > > >
> > > >
> > > >
> > > > I re-did this lab testing with 1841 running 12.4(11)T7 Advance
> IPSERVCES
> > > > image.
> > > >
> > > >
> > > >
> > > > Router Model : 1841
> > > >
> > > > Topology : 1841----MODEM(RFC1483
> > > > Bridge)---------DSLAM(LAC)----IPCLOUD----Providermanaged LNS
> > > >
> > > >
> > > > I enabled following debug
> > > >
> > > >
> > > >
> > > > 1) PPP Neg and PPP AUTH
> > > >
> > > > 2) Dialer events
> > > >
> > > >
> > > >
> > > > When I tried to genarate the traffic I could see dialer is not
> > initiating
> > > > the
> > > > PPP at all.
> > > >
> > > >
> > > >
> > > > Any ideas what could be wrong. I appreciate any help in resolving
> this
> > > > issue.
> > > >
> > > >
> > > > ERIKS-TEST-R1#ping 172.20.83.1
> > > >
> > > > Type escape sequence to abort.
> > > > Sending 5, 100-byte ICMP Echos to 172.20.83.1, timeout is 2 seconds:
> > > >
> > > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> > > > interesting
> > > > (ip PERMIT)
> > > > Di1 DDR: Cannot place call, no dialer string set.
> > > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> > > > interesting
> > > > (ip PERMIT)
> > > > Di1 DDR: Cannot place call, no dialer string set
> > > > Di1 DDR: ip (s=172.30.128.9, d=82.196.34.254), 76 bytes, outgoing
> > > > interesting
> > > > (ip PERMIT)
> > > > Di1 DDR: Cannot place call, no dialer string set.
> > > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> > > > interesting
> > > > (ip PERMIT)
> > > > Di1 DDR: Cannot place call, no dialer string set.
> > > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> > > > interesting
> > > > (ip PERMIT)
> > > > Di1 DDR: Cannot place call, no dialer string set.
> > > > Di1 DDR: ip (s=172.30.128.9, d=172.20.83.1), 100 bytes, outgoing
> > > > interesting
> > > > (ip PERMIT)
> > > > Di1 DDR: Cannot place call, no dialer string set.
> > > > Success rate is 0 percent (0/5)
> > > >
> > > >
> > > > Pls find below router configs .
> > > >
> > > >
> > > >
> > > > ERIKS-TEST-R1#
> > > >
> > > >
> > > > RUnning configuration:-
> > > >
> > > > Building configuration...
> > > >
> > > > Current configuration : 1575 bytes
> > > > !
> > > > version 12.3
> > > > no service timestamps debug uptime
> > > > service timestamps log datetime msec
> > > > no service password-encryption
> > > > !
> > > > hostname ERIKS-TEST-R1
> > > > !
> > > > boot-start-marker
> > > > boot-end-marker
> > > > !
> > > > enable secret 5 $1$HxhJ$Xr15HUD0MhM1BahR3vQxI.
> > > > !
> > > > memory-size iomem 25
> > > > mmi polling-interval 60
> > > > no mmi auto-configure
> > > > no mmi pvc
> > > > mmi snmp-timeout 180
> > > > no aaa new-model
> > > > ip subnet-zero
> > > > ip cef
> > > > !
> > > > !
> > > > !
> > > > !
> > > > no ip domain lookup
> > > > ip ips po max-events 100
> > > > vpdn enable
> > > > !
> > > > vpdn-group 1
> > > > request-dialin
> > > > protocol pppoe
> > > > !
> > > > no ftp-server write-enable
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > no crypto isakmp ccm
> > > > !
> > > > !
> > > > !
> > > > !
> > > > interface Loopback0
> > > > ip address 172.30.128.9 255.255.255.255
> > > > !
> > > > interface FastEthernet0/0
> > > > no ip address
> > > > speed 100
> > > > full-duplex
> > > > pppoe enable group global
> > > > pppoe-client dial-pool-number 1
> > > > !
> > > > interface FastEthernet0/1
> > > > no ip address
> > > > duplex auto
> > > > speed auto
> > > > !
> > > > interface ATM0/1/0
> > > > no ip address
> > > > no atm ilmi-keepalive
> > > > dsl operating-mode auto
> > > > !
> > > > interface Dialer1
> > > > description ADSL2+ 02085605343 Provider TISCALI
> > > > ip address negotiated
> > > > ip mtu 1460
> > > > encapsulation ppp
> > > > ip tcp adjust-mss 1420
> > > > dialer pool 1
> > > > dialer-group 1
> > > > no cdp enable
> > > > ppp chap hostname <<HOST NAME REMOVED>>
> > > >
> > > > ppp chap password 0 <<PASSWORD REMOVED>>
> > > > ppp pap refuse
> > > > !
> > > > ip classless
> > > > ip route 0.0.0.0 0.0.0.0 Dialer1
> > > > !
> > > > !
> > > > ip http server
> > > > no ip http secure-server
> > > > !
> > > > dialer-list 1 protocol ip permit
> > > > !
> > > > !
> > > > !
> > > > !
> > > > control-plane
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > !
> > > > line con 0
> > > > line aux 0
> > > > line vty 0 4
> > > > password vanco
> > > > login
> > > >
> > > >
> > > >
> > > > Thanks and Regards
> > > >
> > > > Arun
> > > >
> > > >
> > > >
> > > > =========================
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > From: jastorino_at_ipexpert.com
> > > > > Date: Tue, 18 May 2010 15:49:10 -0400
> > > > > Subject: Re: RFC1483 Bridging
> > > > > To: aarumuga_at_hotmail.com
> > > > > CC: aarumuganainar_at_relianceglobalcom.com; ccielab_at_groupstudy.com
> > > > >
> > > > > Try debug ppp neg / debug ppp auth and see what you get
> > > > >
> > > > > On Tue, May 18, 2010 at 10:32 AM, Arun Kumar Arumuganainar
> > > > > <aarumuga_at_hotmail.com> wrote:
> > > > > > I did tried the configs that you have suggested . I did not see
> any
> > > > activity
> > > > > > on the router.
> > > > > >
> > > > > > I did enable PPP authentication. But did not get any message back
> > > > > >
> > > > > > Am I missing something? Is there any debug commands that I can
> use
> > to
> > > > spot
> > > > > > where the issue is.
> > > > > >
> > > > > > Thanks and Regards
> > > > > > Arun
> > > > > >
> > > > > >> From: jastorino_at_ipexpert.com
> > > > > >> Date: Tue, 18 May 2010 06:57:47 -0400
> > > > > >> Subject: Re: RFC1483 Bridging
> > > > > >> To: aarumuga_at_hotmail.com
> > > > > >> CC: aarumuganainar_at_relianceglobalcom.com;
> ccielab_at_groupstudy.com
> > > > > >>
> > > > > >> Hi Arun,
> > > > > >>
> > > > > >> First, make sure you set your DSL modem to bridged mode properly
> > like
> > > > > >> you said. Then, you will need to configure PPPoE on the Cisco
> > router.
> > > > > >> Give this a try
> > > > > >>
> > > > > >> interface FastEthernet0/0
> > > > > >> no ip address
> > > > > >> pppoe enable
> > > > > >> pppoe-client dial-pool-number 1
> > > > > >> !
> > > > > >> interface Dialer1
> > > > > >> mtu 1492
> > > > > >> ip address negotiated
> > > > > >> encapsulation ppp
> > > > > >> dialer pool 1
> > > > > >>
> > > > > >> HTH
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> On Tue, May 18, 2010 at 6:35 AM, Arun Kumar Arumuganainar
> > > > > >> <aarumuga_at_hotmail.com> wrote:
> > > > > >> > Hi,
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > I need some help in setting my router. My set up look like
> this.
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > 877 ------- NETGEAR/DLINIK MODEM----------------PROVIDER
> DSALAM
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > I wanted PPPOE terminating on to my router's ethernet
> interface
> > > > rather
> > > > > >> > than
> > > > > >> > the modem. The reason being , I wanted to do some clever stuff
> > :-)
> > > > > >> > behind the
> > > > > >> > router.
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > I could see there are options available on NETGEAR or DLINK
> modem
> > > > for
> > > > > >> > RFC
> > > > > >> > 1483 Bridging. But could not figure out how to configure 877 .
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > Do any body have any sample configuration for such a type of
> > > > scenario.
> > > > > >> > It
> > > > > >> > would be great if you can help me here.
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > Thanks and Regards
> > > > > >> >
> > > > > >> > Arun
> > > > > >> >
> > > > > >> >
> > > > > >> >
> _________________________________________________________________
> > > > > >> > Catch the latest in the world of fashion
> > > > > >> > http://lifestyle.in.msn.com/
> > > > > >> >
> > > > > >> >
> > > > > >> > Blogs and organic groups at http://www.ccie.net
> > > > > >> >
> > > > > >> >
> > > >
> _______________________________________________________________________
> > > > > >> > Subscription information may be found at:
> > > > > >> > http://www.groupstudy.com/list/CCIELab.html
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> --
> > > > > >> Regards,
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> Joe Astorino - CCIE #24347
> > > > > >> Sr. Technical Instructor - IPexpert
> > > > > >> Mailto: jastorino_at_ipexpert.com
> > > > > >> Telephone: +1.810.326.1444
> > > > > >> Live Assistance, Please visit: www.ipexpert.com/chat
> > > > > >> eFax: +1.810.454.0130
> > > > > >>
> > > > > >> IPexpert is a premier provider of Self-Study Workbooks, Video on
> > > > > >> Demand, Audio Tools, Online Hardware Rental and Classroom
> Training
> > for
> > > > > >> the Cisco CCIE (R&S, Voice, Security & Service Provider)
> > > > > >> certification(s) with training locations throughout the United
> > States,
> > > > > >> Europe, South Asia and Australia. Be sure to visit our online
> > > > > >> communities at www.ipexpert.com/communities and our public
> website
> > at
> > > > > >> www.ipexpert.com
> > > > > >
> > > > > > ________________________________
> > > > > > The battle for the FIH Hockey World Cup Drag n' drop
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Regards,
> > > > >
> > > > >
> > > > >
> > > > > Joe Astorino - CCIE #24347
> > > > > Sr. Technical Instructor - IPexpert
> > > > > Mailto: jastorino_at_ipexpert.com
> > > > > Telephone: +1.810.326.1444
> > > > > Live Assistance, Please visit: www.ipexpert.com/chat
> > > > > eFax: +1.810.454.0130
> > > > >
> > > > > IPexpert is a premier provider of Self-Study Workbooks, Video on
> > > > > Demand, Audio Tools, Online Hardware Rental and Classroom Training
> for
> > > > > the Cisco CCIE (R&S, Voice, Security & Service Provider)
> > > > > certification(s) with training locations throughout the United
> States,
> > > > > Europe, South Asia and Australia. Be sure to visit our online
> > > > > communities at www.ipexpert.com/communities and our public website
> at
> > > > > www.ipexpert.com
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > > _________________________________________________________________
> > > > Climate, controversies and the changing signatures of nature
> > > > http://green.in.msn.com/
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > _________________________________________________________________
> > Climate, controversies and the changing signatures of nature
> > http://green.in.msn.com/
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
> ------------------------------
>
> Invest your money wisely post Budget Sign up now.<http://news.in.msn.com/moneyspecial/>
>
> ------------------------------
> The battle for the FIH Hockey World Cup Drag n' drop<http://specials.msn.co.in/sp10/hockey/index.aspx>

Blogs and organic groups at http://www.ccie.net
Received on Wed May 19 2010 - 17:40:35 ART