Re: Cisco ACS 4.2 and ASA

AAa configuration on the ASA

xxxxxxx# sh running-config | include aaa
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ (inside) host xxx.xxx.xxx.xxx
aaa authentication telnet console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa accounting enable console TACACS+

On Tue, May 18, 2010 at 1:19 PM, Shaughn Smith <maniac.smg_at_gmail.com> wrote:

> Should have clarified, I can see entries in the passed and failed logs.
>
> AAA config coming up
>
> On Tue, May 18, 2010 at 1:18 PM, Ryan West <rwest_at_zyedge.com> wrote:
>
>> Can you post your AAA config? Do you see entries in the passed and
>> failed auth logs?
>>
>> Sent from handheld.
>>
>> On May 18, 2010, at 7:01 AM, "Shaughn Smith" <maniac.smg_at_gmail.com>
>> wrote:
>>
>> > Hi All
>> >
>> > I have a very strange problem. I am running Cisco ASC 4.2 as well as
>> > a 5540
>> > ASA, I have setup TACACS+ auth to the ACS which is working 100%.
>> > However
>> > when i try and view the reports for Tacacs+ accounting the reports are
>> > blank. Same goes for Tacacs+ Administration.
>> >
>> > I have seen there were some bugs with ACS 4.1 but havent been able
>> > to find
>> > any issues relating to 4.2, anyone here seen this before ?
>> >
>> > Thanks
>> >
>> > CCIE # 23962 (SP)
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>>
>>
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue May 18 2010 - 14:00:27 ART