RE: QoS - nesting

Hit send too quick.

Is the "priority 1000" (guarantees 1Meg) and setting of the dscp to ef going
to be applied if it is nested under the default class?

Thanks.

Tony

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Tony
Sent: Thursday, May 13, 2010 7:32 PM
To: ccielab_at_groupstudy.com
Subject: QoS - nesting

Referencing the docs on nesting -
<http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/qos_frhqf_suppo
rt_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1062013>
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/qos_frhqf_suppor
t_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1062013
 
gives an example of nesting, but does not use the same class name in both
policy maps as does the example below.
 
1. What happens if you use the same name for a class to nest a policy when
you used the same name in the policy you are nesting? The example in the
docs uses a different name besides the default "class-default". Does not
seem right but it is passing traffic.
 
   
policy-map VOICE_QoS
 class voice-ethernet
    priority 1000
   set ip dscp ef
 class signaling-ethernet
    bandwidth 20
 class class-default
    fair-queue
     random-detect dscp-based
  
policy-map SHAPE
 class class-default
    shape average 5000000
  service-policy VOICE_QoS
!

 
 
Thanks.
 
Tony

Blogs and organic groups at http://www.ccie.net
Received on Thu May 13 2010 - 19:40:25 ART