Re: OT:Automatic Configuration of 176 APs (through TFTP)

Hi Richard,

I am referencing Autonomous APs currently. At some point in time, the client
will migrate to LWAP APs with a controller. However currently i have 176
APs, my idea is to connect a TFTP server and put all the common
configurations on it, and thus the AP will get an IP address through DHCP
and then ask for a configuration from a TFTP server? Is this possible.

I really appreciate your help!

Thank You

On Mon, May 10, 2010 at 11:13 AM, Richard <ccieking_at_gmail.com> wrote:

> What type of AP? Lightweight or Autonomous
> Which controller are you using? WiSM or 4404
> Are you planning to use WCS?
>
> I would recommend you to use Lightweight mode AP, WiSM controller and WCS.
> So you can control all APs via WCS.
>
> On Mon, May 10, 2010 at 1:23 PM, karim jamali <karim.jamali_at_gmail.com>wrote:
>
>> Dear Gents,
>>
>> I have around 176 APs to be configured. Is there any method by which the
>> AP
>> can be pushed a configuration from a TFTP server, and thus automate the
>> configuration process?
>>
>> Your help is much appreciated as this will minimize the effort/time
>> required
>> to complete a task @ hand.
>>
>> Best Regards,
>>
>> --
>> KJ
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>

-- 
KJ
Blogs and organic groups at http://www.ccie.net