WCCP and WAE question regarding high cpu utilization.

I'm using a nme-wae card in an ISR router and using wccp to redirect
traffic, all traffic.

I notice that the CPU utilization gets to 100% and when I do a "show
ip wccp" i notice CEF switched packets are zero and process switched
packets are many, leading me to believe that's the reason for high
cpu...

Any suggestions on how to fix this?

Global WCCP information:
    Router information:
        Router Identifier: 192.168.133.21
        Protocol Version: 2.0

    Service Identifier: 61
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets s/w Redirected: 141892759
          Process: 141892759
          CEF: 0
        Service mode: Open
        Service Access-list: -none-
        Total Packets Dropped Closed: 0
        Redirect Access-list: WAAS_PERMIT_ANY
        Total Packets Denied Redirect: 0
        Total Packets Unassigned: 7881
        Group Access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total Bypassed Packets Received: 784

    Service Identifier: 62
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets s/w Redirected: 138317602
          Process: 137859756
          CEF: 457846
        Service mode: Open
        Service Access-list: -none-
        Total Packets Dropped Closed: 0
        Redirect Access-list: WAAS_PERMIT_ANY
        Total Packets Denied Redirect: 168333787
        Total Packets Unassigned: 9094
        Group Access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total Bypassed Packets Received: 732

!
interface FastEthernet0/0
 ip address 192.168.70.161 255.255.255.252 secondary
 ip address 10.160.1.3 255.255.255.0
 ip wccp 61 redirect in
 ip pim sparse-dense-mode
 ip cgmp
 duplex full
 speed 100
 standby 1 ip 10.160.1.2
 standby 1 timers 5 15
 standby 1 priority 105
 standby 1 preempt
 standby 1 track Multilink1
end

interface Multilink1
 description
 bandwidth 4096

 ip wccp 62 redirect in
 ip flow ingress
 ip flow egress
 no peer neighbor-route
 ppp chap hostname abc
 ppp multilink
 ppp multilink links minimum 1
 ppp multilink group 1
 ppp multilink fragment disable
 service-policy output QOS
end

Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 30 2010 - 16:42:51 ART