Re: Representing internal server with 2 different Public IP

It should not be impossible to do it... as far as only incoming
connections to the port are being natted. Isn't that what extensible is
for ?

-Carlos

Tyson Scott @ 28/04/2010 12:12 -0300 dixit:
> As what you are trying to do on the firewall is impossible move the
> requirement back to the server. Configure a second IP on the NIC. Search
> Google for how to do this based on the operating system the server is
> running. Both Linux and Windows support this feature.
>
> Next time put OT: <followed by subject> in the subject field. That is the
> courtesy requirement of group study. This is not related to the CCIE exam.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Technical Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
> Telephone: +1.810.326.1444, ext. 208
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Jack
> Router
> Sent: Wednesday, April 28, 2010 10:27 AM
> To: 'Cisco certification'
> Subject: RE: Representing internal server with 2 different Public IP
>
> Still curious why you want to do this...
> What about configuring the server with two internal IPs and then redirect
> with two different rules on the firewall ?
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> imran mohammed
> Sent: 28-Apr-10 09:36
> To: Cisco certification
> Subject: Re: Representing internal server with 2 different Public IP
>
> Hi,
>
> The requirement is I need to represent internal server with 2 different
> public ip.
>
> Example
>
> When I hit the firewall 10.1.1.1 on outside it should redirect to 20.1.1.1
> (internal server)
> If I hit with 30.1.1.1 on outside it should redirect to same ip 20.1.1.1
> (internal server)
>
>
> Regards
> Imran
>
> On Wed, Apr 28, 2010 at 5:02 PM, imran mohammed
> <imran4cisco_at_gmail.com>wrote:
>
>> Hi All,
>>
>>
>> Is there any way we can represent internal server with 2 public Ip
> address.
>> static (inside,outside) tcp 88.x.x.49 smtp 192.168.0.55 smtp
>> static (inside,outside) tcp 88.x.x.51 smtp 192.168.0.55 smtp
>>
>> The above command doesnt work.I know it doesnt make sense but that is the
>> requirement.
>>
>> I tried this as well doesnt work
>> static (inside,outside) tcp 88.x.x.49 smtp 192.168.0.55 smtp
>> static (inside,outside) tcp 88.x.x.51 2043 192.168.0.55 smtp
>>
>> Is there anyway to do this.
>>
>> Regards
>> Imran
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net