Re: eem configuration example

hahahahaha

This is part of my NEW work book that will be out in 10 days, the work book
is called boot camp 2.0 (Configure, verify and TEST) and i copied and pasted
a sample lab from that work book.

I hope it was helpful.

On Thu, Apr 22, 2010 at 11:25 AM, imran ali <immrccie_at_gmail.com> wrote:

> wow narbik what's ur typing speed :) ??
>
> kambiz second link seems to be broken ..
>
> thanks
>
> On Thu, Apr 22, 2010 at 11:49 PM, Narbik Kocharians <narbikk_at_gmail.com>wrote:
>
>> Ali,
>>
>> The examples that Keith and the URL that Kambiz provided are excellent,
>> but
>> here is an example that can start you with EEM configuration in a very
>> basic
>> maner:
>>
>>
>> Configure two applets named R2EEM and R4EEM; the R2EEM should be
>> configured
>> such that it assigns an IP address of 10.1.24.2 /24 to the F0/0 interface
>> of
>> R2, and the R4EEM should be configured such that it assigns an IP address
>> of
>> 10.1.24.4 /24 to the F0/0 interface of R4. These two applets should also
>> enable the F0/0 interface of R2 and R4.
>>
>>
>>
>>
>>
>> *On R2*
>>
>>
>>
>> R2(config)#*event manager applet R2EEM*
>>
>> R2(config-applet)#*event none sync yes*
>>
>> R2(config-applet)#*action 1.0 cli command "enable"*
>>
>> R2(config-applet)#*action 1.1 cli command "config terminal"*
>>
>> R2(config-applet)#*action 1.2 cli command "interface F0/0"*
>>
>> R2(config-applet)#*action 1.3 cli command "ip address 10.1.24.2
>> 255.255.255.0"*
>>
>> R2(config-applet)#*action 1.4 cli command "no shut"*
>>
>> R2(config-applet)#*action 1.5 cli command "end"*
>>
>>
>>
>> *EEM applets are divided into three sections: *
>>
>> * *
>>
>> - *The name: in this case the event manager applet R2EEM command is
>> used to name the applet R2EEM .*
>> - *The trigger (or event): the trigger is defined with the event none
>> sync yes command. This is an event which is used to instruct the applet
>> to
>> execute. The event none states that there is to be a manual trigger
>> which
>> means that the applet should be executed from the CLI using the event
>> manager run command. The sync yes command instructs the router to run
>> the
>> commands in this applet synchronously with the router CLI, rather than
>> execute them in a batch which helps prevent command overruns.*
>>
>> * *
>>
>> - *The action: When the applet executes the commands it uses the action
>> statements, these must be numbered in ascending order, in this example
>> the
>> action statements are to place the router in privilege mode, then, in
>> global
>> config mode, then, interface configuration mode, then, it assigns an IP
>> address, then, enables (NO SHUT) the interface and finally exits back to
>> the
>> privilege mode. *
>>
>>
>>
>> *On R4*
>>
>>
>>
>> R4(config)#*event manager applet R4EEM*
>>
>> R4(config-applet)#*event none sync yes*
>>
>> R4(config-applet)#*action 1.0 cli command "enable"*
>>
>> R4(config-applet)#*action 1.1 cli command "config terminal"*
>>
>> R4(config-applet)#*action 1.2 cli command "interface F0/0"*
>>
>> R4(config-applet)#*action 1.3 cli command "ip address 10.1.24.4
>> 255.255.255.0"*
>>
>> R4(config-applet)#*action 1.4 cli command "no shut"*
>>
>> R4(config-applet)#*action 1.5 cli command "end"*
>>
>>
>>
>> *To test and verify the configuration:*
>>
>> * *
>>
>> *On R2*
>>
>>
>>
>> R2#*event manager run R2EEM*
>>
>>
>>
>> *You should see the following console message:*
>>
>> * *
>>
>> *%SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:R2EEM)*
>>
>> * *
>>
>> *R2#Show ip int brief F0/0*
>>
>> * *
>>
>> Interface IP-Address OK? Method Status
>> Protocol
>>
>> *FastEthernet0/0 10.1.24.2 YES manual up up***
>>
>>
>>
>> *To test and verify the configuration:*
>>
>> * *
>>
>> *On R4*
>>
>>
>>
>>
>>
>> R4#*event manager run R4EEM*
>>
>>
>>
>> *R4#Show ip int brie F0/0*
>>
>> * *
>>
>> Interface IP-Address OK? Method Status
>> Protocol
>>
>> *FastEthernet0/0 10.1.24.4 YES manual up up** *
>>
>>
>>
>>
>>
>> I hope this helped.
>> On Thu, Apr 22, 2010 at 11:04 AM, Kambiz Agahian
>> <kagahian_at_ccbootcamp.com>wrote:
>>
>> > Here is the actual gateway to find all EEM related stuff:
>> >
>> >
>> >
>>
>> http://www.cisco.com/en/US/products/ps6815/products_ios_protocol_group_home.h
>> > tml
>> >
>> > And this one is a simple guide to configure ISR boxes with some nice
>> > examples:
>> >
>> >
>> >
>>
>> http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6815/conf
>> >
>> >
>>
>> ig_guide_eem_configuration_for_cisco_integrated_services_router_platforms.htm
>> > l
>> >
>> >
>> > HTH
>> >
>> > --------------------------
>> > Kambiz Agahian
>> > CCIE (R&S)
>> > CCSI, WAASSE, RSSSE
>> > Technical Instructor
>> > CCBOOTCAMP - Cisco Learning Solutions Partner (CLSP)
>> > Email: kagahian_at_ccbootcamp.com
>> > Toll Free: 877-654-2243
>> > International: +1-702-968-5100
>> > Skype: skype:ccbootcamp?call
>> > FAX: +1-702-446-8012
>> > YES! We take Cisco Learning Credits!
>> > Training And Remote Racks: http://www.ccbootcamp.com
>> > OEQ Voice Waiver: http://www.ccbootcamp.com/noeqvoice.html
>> > OEQ R&S Waiver: http://www.ccbootcamp.com/noeqrs.html
>> > OEQ Commercial: http://www.ccbootcamp.com/noeq.mpg
>> >
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: nobody_at_groupstudy.com on behalf of ehtesham ali
>> > Sent: Thu 4/22/2010 10:56 AM
>> > To: ccielab_at_groupstudy.com
>> > Subject: eem configuration example
>> >
>> > HI group,
>> >
>> > As i am new to EEM , i just wanted an example task of EEM and any
>> reference
>> > guides to start off as related to rs exam. (no nda violation :)
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> --
>> Narbik Kocharians
>> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
>> www.MicronicsTraining.com <http://www.micronicstraining.com/>
>> Sr. Technical Instructor
>> YES! We take Cisco Learning Credits!
>> Training And Remote Racks available
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net