RE: Gs724T with 2800 (dot1q trunk)

When did they add netgear to the ccie lab?

JK :)

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of ccie
study
Sent: Tuesday, April 20, 2010 6:51 AM
To: ccielab_at_groupstudy.com
Subject: Gs724T with 2800 (dot1q trunk)

Hi,
I'm trying to configure a simple environment (router on a stick) with
NetGear
GS724T. In Summary - multiple VLANs on the NetGear switch and 2800 is doing
all the routing in between.

config on 2800:

ip dhcp excluded-address 10.97.41.1 10.97.41.10
!
ip dhcp pool wifi-pool
   network 10.97.41.0 255.255.255.0
   dns-server 8.8.8.8
   default-router 10.97.41.1
   lease 7

interface GigabitEthernet0/1
 description Data LAN Port
 no ip address
 duplex full
 speed auto
 no keepalive
!
interface GigabitEthernet0/1.1
 encapsulation dot1Q 1 native
 ip address 1.1.1.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
!
interface GigabitEthernet0/1.11
 encapsulation dot1Q 11
 ip address 10.97.11.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
!
interface GigabitEthernet0/1.41
 encapsulation dot1Q 41
 ip address 10.97.41.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly

G0/1 is what is connecting the NetGear switch. NetGear switch is (hoping it
is) configured for a trunk port with native vlan 1 dot1q and bunch of ports
in
VLAN41 in which servers are connected to which right now when I configured
via
DHCP or Static can NOT ping the default gateway of vlan 41: 10.97.41.1.

I've search online - found some docs on NetGear and followed it - but no
luck
still.

Anyone running this that can share configs?

Thank you much.
Received on Tue Apr 20 2010 - 07:35:40 ART