Well, true... My brain...B Since IGPs all reference off the link-local,
that's where my first line of troubleshooting is and easiest to remember
to configure...
But you are correct, it's DLCI-based, not IP/IPv6 address based.
B
Scott
Marko Milivojevic wrote:
Also keep in mind that you only need the broadcast parameter on the frame
maps associated with your link-local addresses, not the unicast ones.
But again, try things out, see what the impact is!
This actually doesn't matter, since broadcast is enabled on DLCI, not
"on the address". If DLCI has broadcast enabled in the line where
global address is mapped, routing will still work with no issues.
As Joe said, you just need to make sure it's there once per DLCI...
per protocol (IP, IPv6). Anything more than that is a waste.
--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
YES! We include 400 hours of REAL rack
time with our Blended Learning Solution!
Mailto: markom_at_ipexpert.com Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Web: http://www.ipexpert.com/
Blogs and organic groups at http://www.ccie.net
Received on Mon Apr 19 2010 - 05:13:54 ART
This archive was generated by hypermail 2.2.0 : Sat May 01 2010 - 09:49:57 ART