RE: Lab 10 Volume 1

Here you go, I'm still working on getting the configs

R7#show ip route 200.0.0.2
% Subnet not in table

R7#sh ip ospf database summary 200.0.0.2

            OSPF Router with ID (200.0.0.7) (Process ID 1)

                Summary Net Link States (Area 567)

  LS age: 1365
  Options: (No TOS-capability, DC, Upward)
  LS Type: Summary Links(Network)
  Link State ID: 200.0.0.2 (summary Network Number)
  Advertising Router: 200.0.0.5
  LS Seq Number: 80000002
  Checksum: 0x5929
  Length: 28
  Network Mask: /32
        TOS: 0 Metric: 1563

-----Original Message-----
From: Joe Astorino [mailto:jastorino_at_ipexpert.com]
Sent: Wednesday, April 14, 2010 9:52 PM
To: Di Bias, Steve
Cc: Bryan Bartik; CCIE Groupstudy
Subject: Re: Lab 10 Volume 1

also, lets have a "show ip route 200.0.0.2" and "sh ip ospf database summary 200.0.0.2" on R7 as well

On Thu, Apr 15, 2010 at 12:48 AM, Joe Astorino <jastorino_at_ipexpert.com> wrote:
> I know I am being picky at this point, but can we just get a sh run on
> R2, R5, R7 please
>
> On Thu, Apr 15, 2010 at 12:15 AM, Di Bias, Steve
> <steve.dibias_at_uhsinc.com> wrote:
>> It looks like R2 is in the LSDB on R7, just not the routing table. Also there is no filtering and Area 567 is not a stub.
>>
>> R7#sh ip o d | i 200.0.0.2
>> 200.0.0.2 200.0.0.5 201 0x80000001 0x005B28
>>
>> R7#sh ip o d | i 150.100.100.0
>> 150.100.100.0 200.0.0.5 204 0x80000001 0x00EC03
>>
>> Here are the configs, I hope you can help me here I'm stumped :(
>>
>> R2
>>
>> router ospf 1
>> router-id 224.0.0.2
>> log-adjacency-changes
>> area 24 stub
>> network 150.100.12.2 0.0.0.0 area 100
>> network 150.100.24.2 0.0.0.0 area 24
>> network 150.100.25.2 0.0.0.0 area 25
>> network 150.100.100.2 0.0.0.0 area 0
>> network 200.0.0.2 0.0.0.0 area 0
>> neighbor 150.100.100.5
>> neighbor 150.100.100.6
>>
>> interface Serial0/1/0.256 multipoint
>> description Frame Relay Cloud 1
>> bandwidth 64
>> ip address 150.100.100.2 255.255.255.0
>> frame-relay map ip 150.100.100.5 205 broadcast
>> frame-relay map ip 150.100.100.6 206 broadcast
>> frame-relay map ip 150.100.100.2 206 end
>>
>> R5
>>
>> router ospf 1
>> log-adjacency-changes
>> network 150.100.25.5 0.0.0.0 area 25
>> network 150.100.100.5 0.0.0.0 area 0
>> network 150.100.220.5 0.0.0.0 area 0.0.2.55
>> network 150.100.221.5 0.0.0.0 area 0.0.2.55
>>
>> interface Serial0/1/0
>> bandwidth 64
>> ip address 150.100.100.5 255.255.255.0
>> encapsulation frame-relay
>> frame-relay map ip 150.100.100.2 502 broadcast
>> frame-relay map ip 150.100.100.6 502
>> no frame-relay inverse-arp
>> frame-relay lmi-type cisco
>> end
>>
>> R7
>>
>> router ospf 1
>> log-adjacency-changes
>> area 78 stub
>> network 150.100.78.7 0.0.0.0 area 78 network 150.100.220.7 0.0.0.0
>> area 567
>> network 150.100.221.7 0.0.0.0 area 567
>> network 200.0.0.7 0.0.0.0 area 567
>>
>> interface FasrEthernet0/0
>> ip address 150.100.220.7 255.255.255.0
>>
>> interface FastEthernet0/1
>> ip address 150.100.221.7 255.255.255.0
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Joe Astorino [mailto:jastorino_at_ipexpert.com]
>> Sent: Wednesday, April 14, 2010 8:03 PM
>> To: Di Bias, Steve; Bryan Bartik
>> Cc: CCIE Groupstudy
>> Subject: Re: Lab 10 Volume 1
>>
>> Is R2 in the LSDB of R7? Any filtering in place? Is 567 a stub of any sort?
>>
>> Post R2, R5, R7 interface and OSPF configurations.
>>
>>
>> Sent from my Verizon Wireless BlackBerry
>>
>> Regards,
>>
>> Joe Astorino - CCIE #24347
>> Sr. Technical Instructor - IPexpert
>> Mailto: jastorino_at_ipexpert.com
>> Telephone: +1.810.326.1444
>> Live Assistance, Please visit: www.ipexpert.com/chat
>> eFax: +1.810.454.0130
>>
>> IPexpert is a premier provider of Self-Study Workbooks, Video on
>> Demand, Audio Tools, Online Hardware Rental and Classroom Training
>> for the Cisco CCIE (R&S, Voice, Security & Service Provider)
>> certification(s) with training locations throughout the United
>> States, Europe, South Asia and Australia. Be sure to visit our online
>> communities at www.ipexpert.com/communities and our public website at
>> www.ipexpert.com
>>
>> -----Original Message-----
>> From: "Di Bias, Steve" <steve.dibias_at_uhsinc.com>
>> Date: Wed, 14 Apr 2010 22:52:32
>> To: Bryan Bartik<bbartik_at_ipexpert.com>
>> Cc: ccielab_at_groupstudy.com<ccielab_at_groupstudy.com>
>> Subject: Re: Lab 10 Volume 1
>>
>> Yes r5 can ping both the r2 and the r7 loopbacks
>>
>> Sent from my iPhone
>>
>> On Apr 14, 2010, at 7:13 PM, "Bryan Bartik" <bbartik_at_ipexpert.com<mailto:bbartik_at_ipexpert.com>> wrote:
>>
>> Does R5 know how to get to R2?
>>
>> On Wed, Apr 14, 2010 at 5:03 PM, Di Bias, Steve <<mailto:steve.dibias_at_uhsinc.com>steve.dibias_at_uhsinc.com<mailto:steve.dibias_at_uhsinc.com>> wrote:
>> *sorry email sent prematurely*
>>
>> Hey everyone,
>>
>> I'm having some strange issues with reachability with OSPF on Lab 10
>> that I can't figure out. Here is an example of something I'm seeing
>>
>> R2--s0/1/0.256---Frame Cloud---s0/1/0--R5-fa0/0--Ethernet-fa0/0--R7
>>
>> R2 has its s0/1/0.256 in Area 0
>> R5 has its s0/1/0 in Area 0
>> R5 has its fa0/0 in Area 567
>> R7 has its fa0/0 in Area 567
>>
>> R5 is an ABR with interfaces in both areas and R7 has an interface in
>> 567. So far no rules have been broken (area 567 touches area 0 on R5)
>> and inter-area communication should be working between the three
>> routers, but it doesn't. As a test on R7 I just added the loopback
>> interface to the OSPF process in area
>> 567
>>
>> R7(config)#router os 1
>> R7(config-router)#net 200.0.0.7 0.0.0.0 area 567
>>
>> On R5 I verified the route and I can ping the loopback on R7
>>
>> R5#sh ip ro 200.0.0.7
>> Routing entry for 200.0.0.7/32<http://200.0.0.7/32>
>> Known via "ospf 1", distance 110, metric 11, type intra area
>> Last update from 150.100.220.7 on FastEthernet0/0, 00:03:51 ago
>> Routing Descriptor Blocks:
>> * 150.100.220.7, from 200.0.0.7, 00:03:51 ago, via FastEthernet0/0
>> Route metric is 11, traffic share count is 1
>>
>> R5#ping 200.0.0.7
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 200.0.0.7, timeout is 2 seconds:
>> !!!!!
>>
>> So we are good from R5 to R7 but not to R2 who has the route but
>> can't ping
>>
>> R2#sh ip route 200.0.0.7
>> Routing entry for 200.0.0.7/32<http://200.0.0.7/32>
>> Known via "ospf 1", distance 110, metric 1573, type inter area
>> Last update from 150.100.100.5 on Serial0/1/0.256, 00:00:14 ago
>> Routing Descriptor Blocks:
>> * 150.100.100.5, from 200.0.0.5, 00:00:14 ago, via Serial0/1/0.256
>> Route metric is 1573, traffic share count is 1
>>
>>
>> R2#ping 200.0.0.7
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 200.0.0.7, timeout is 2 seconds:
>> .....
>> If I run a debug on R2 and then run a ping to 200.0.0.7 it shows
>> routed vis FIB like this
>>
>> R2(config)#access-list 101 permit icmp any any R2(config)#do deb ip
>> pack 101 de R2(config)#do ping 200.0.0.7 Sending 5, 100-byte ICMP
>> Echos to 200.0.0.7, timeout is 2 seconds:
>>
>> *May 13 00:29:37.057: IP: tableid=0, s=150.100.100.2 (local),
>> d=200.0.0.7 (Serial0/0.256), routed via FIB
>>
>> So it R2 knows how to get to R7 the issue must be that R7 doesn't
>> know how to get to back to R2
>>
>> R7#sh ip ro 200.0.0.2
>> % Subnet not in table
>>
>> It seems like Area 0 routes aren't coming over to Area 567, any ideas?
>>
>>
>>
>>
>>
>>
>>
>>
>> UHS Confidentiality Notice: This e-mail message, including any
>> attachments, is for the sole use of the intended recipient (s) and
>> may contain confidential and privileged information. Any
>> unauthorized review, use, disclosure or distribution of this
>> information is prohibited. If this was sent to you in error, please
>> notify the sender by reply e-mail and destroy all copies of the original message.
>>
>>
>> Blogs and organic groups at <http://www.ccie.net> http://www.ccie.net
>>
>> _____________________________________________________________________
>> __ Subscription information may be found at:
>> <http://www.groupstudy.com/list/CCIELab.html>http://www.groupstudy.co
>> m/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>> Bryan Bartik
>> CCIE #23707 (R&S, SP), CCNP
>> Sr. Support Engineer - IPexpert, Inc.
>> URL: <http://www.IPexpert.com> http://www.IPexpert.com
>>
>>
>> UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _____________________________________________________________________
>> __ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message.
>>
>
>
>
> --
> Regards,
>
>
>
> Joe Astorino - CCIE #24347
> Sr. Technical Instructor - IPexpert
> Mailto: jastorino_at_ipexpert.com
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on
> Demand, Audio Tools, Online Hardware Rental and Classroom Training for
> the Cisco CCIE (R&S, Voice, Security & Service Provider)
> certification(s) with training locations throughout the United States,
> Europe, South Asia and Australia. Be sure to visit our online
> communities at www.ipexpert.com/communities and our public website at
> www.ipexpert.com
>

--
Regards,
Joe Astorino - CCIE #24347
Sr. Technical Instructor - IPexpert
Mailto: jastorino_at_ipexpert.com
Telephone: +1.810.326.1444
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130
IPexpert is a premier provider of Self-Study Workbooks, Video on
Demand, Audio Tools, Online Hardware Rental and Classroom Training for
the Cisco CCIE (R&S, Voice, Security & Service Provider)
certification(s) with training locations throughout the United States,
Europe, South Asia and Australia. Be sure to visit our online
communities at www.ipexpert.com/communities and our public website at
www.ipexpert.com
UHS Confidentiality Notice:  This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information.  Any unauthorized review, use, disclosure or distribution of this information is prohibited.  If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message.
Blogs and organic groups at http://www.ccie.net