Re: Cache Flow and Bandwidth measure

The issue is that using cisco mars I can not get a graphic with procolos in
colors, you know. 2Mbps of bandwidth and from this 10%, htts, 20, https, 50
sql, and so on,

Regards

----- Original Message -----
From: "Nathan Hull" <verb2300_at_yahoo.com>
To: <tscott_at_ipexpert.com>; <ezorrilla_at_tsf.com.pe>
Cc: <security_at_groupstudy.com>; <ccielab_at_groupstudy.com>
Sent: Friday, April 09, 2010 10:40 PM
Subject: RE: Cache Flow and Bandwidth measure

> MARS does monitor interface utiization. If your referring to ingress vs
> egress traffic and netflow it depends on the version your using. V5 only
> suppoerts ingress, but if its enabled on all interfaces (which is key) it
> is easy to determine egress based on next hop etc.. If you want both you
> have to run V9.
>
> On Fri Apr 9th, 2010 5:22 PM MDT Tyson Scott wrote:
>
>>I recommend Cacti in combination with flow-scan.
>>
>>http://forums.cacti.net/about1004.html
>>
>>It is not a point and click installation to get it up and running but it
>>will definitely do what you are looking for.
>>
>>Regards,
>>
>>Tyson Scott - CCIE #13513 R&S, Security, and SP
>>Technical Instructor - IPexpert, Inc.
>>Mailto: tscott_at_ipexpert.com
>>Telephone: +1.810.326.1444, ext. 208
>>Live Assistance, Please visit: www.ipexpert.com/chat
>>eFax: +1.810.454.0130
>>
>>
>>-----Original Message-----
>>From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>>Keith Barker
>>Sent: Friday, April 09, 2010 6:06 PM
>>To: Edouard Zorrilla
>>Cc: Cisco certification; Cisco certification
>>Subject: Re: Cache Flow and Bandwidth measure
>>
>>How many HUBs are in your DMVPN?
>>
>>PRTG is a decent solution, you may want to check it out. If you are not
>>looking for a long term solution but want to create graphs, I believe they
>>have a demo that can be used/tested for a period of time for free.
>>
>>http://www.paessler.com/tools
>>
>>Best wishes,
>>
>>Keith H. Barker, CCIE #6783
>>Instructor
>>kbarker_at_ine.com
>>Internetwork Expert, Inc.
>>http://ine.com
>>Toll Free: 877-224-8987
>>Outside US: 775-826-4344
>>
>>On Apr 9, 2010, at 4:34 PM, Edouard Zorrilla wrote:
>>
>>> Hi,
>>>
>>> I have more than 400 spokes on a DMVPN solution, I have enabled in some
>>> of
>>> them "cache flow" so that now I can see all protocols and traffic trough
>>cli.
>>>
>>> I have also a cisco mars, but Mars does not give me the bandwidth
>>> upstream
>>and
>>> downstream is currently using, I just can get reports from there.
>>>
>>> Is there a free software that allow me to get a graph the bandwith
>>> consumption (with procolos) using the information that routers send
>>> (cache
>>> flow) ?,
>>>
>>> Any answer would be appreciated.,
>>>
>>> Regards
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>Blogs and organic groups at http://www.ccie.net
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 13 2010 - 13:00:36 ART