Re: OT - 4E1 to Fastethernet convertor

There are so many Taiwan product available which are cheaper in cost than
Cisco .

If you need cisco then It might be solution .You can use VWIC2-2MFT-T1/E1 ,
In every card at a time you can use both E1 port or both T1 but not One T1
and One E1

  Product Description Quantity CISCO1841 Modular Router w/2xFE, 2 WAN
slots, 64 FL/256 DR 1 CAB-ACU AC Power Cord (UK), C13, BS 1363, 2.5m 1
S184IPB-12425 Cisco 1841 IOS IP BASE W/O CRYPTO 1 VWIC2-2MFT-T1/E1 2-Port
2nd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1 2

 Thanks
Shahid Ansari

On Mon, Apr 12, 2010 at 10:33 AM, jockey wearer <jockeywearer_at_gmail.com>wrote:

> Dear All,
>
> I am really thankful to be part of groupstudy and whenever I am in trouble
> ,I got clue from expert people .
>
> Again, I have to do some setup but little bit confuse as I dont have very
> much experience in E1line/T1 Lines.
>
> I want to connect 4 E1 line (Framed) which is input and 1 FastEthernet
> output by using cisco Router .
> I need to use it only for data .did cisco routers support that ?which model
> I need to select and which E1 card ?
> Is there any product rather than cisco which are cheaper ? I prefer cisco
> ..
>
> Thanks
> Prashant
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Apr 12 2010 - 11:49:11 ART