Re: Anycast RP

Did you set "ip msdp originator-id" correctly?

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
YES! We include 400 hours of REAL rack
time with our Blended Learning Solution!
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Web: http://www.ipexpert.com/
On Sun, Mar 28, 2010 at 19:52, Muzammil Malick <malickmuz_at_gmail.com> wrote:
> Hi
>
> I am having a problem with Anycast RP configuration. I have a scenario where
> all routers are running OSPF. There is complete reachability end to end
> and I have configured all Multicast routers with the same RP address. This
> RP address is configured as a loopback on 2 of my RPs.
> I have used MSDP to peer between these RPs and everything looks good. The
> are exchanging SAs and accepting.
> However when I ping the group I do not receive a reply (a receiver has
> joined). I can see the traffic hitting the last hop router and being
> forwarded to the receiver using "debug ip mpacket"
> and the mroutes on all multicast routers have the correct incoming
> and outgoing interfaces.
> Am I missing something?
> It worked fine when I used MSDP between different AS'
> But doesn't work when using MSDP between Anycast RPs
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net