RE: STP root primary and secondary

I configure my 6509s core switches using the *spanning-tree root primary* and
secondary commands and I got the same priority numbers that you did, Im
running 12.2 (17R).
So I guess maybe the cisco doc is not 100% accurate.

> Date: Mon, 22 Mar 2010 10:33:00 -0400
> From: ccie.unnumbered_at_gmail.com
> To: ccielab_at_groupstudy.com
> Subject: STP root primary and secondary
>
>
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_
example09186a00807b0670.shtml#PVST
>
> In the article above, it says,
> *Note: *The *spanning-tree root primary* command alters the switch's
> bridge priority to *8192* and the *spanning-tree root secondary* command
> alters the priority to *16384*.
>
> In my lab with Cisco 3560, it shows:
> spanning-tree vlan 10-15 priority 24576
> spanning-tree vlan 16-20 priority 28672
>
> after I entered the root pri and root sec commands, respectively.
>
>
> Question:
> 1. What is the date of the mentioned link?
> 2. What versions will show 8192 and 16384?
>
>
> My version is 12.2(44)SE2.
>
>
> Thanks,
> Jack
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
Received on Mon Mar 22 2010 - 17:30:03 ART