¦^ĀŠ: RE: CME problem with H323 GW

Hi

The command should be preference, not presence. I have tried to remove the
configuraiton for ephone-dn, the dial-peer work immediately.

I set preference under ephon-dn as I want to phone call dial-peer first
instead of ephone-dn.

Thanks
David

-----l)l0T.'----
1H%s$H: adel_at_netmasterclass.net
$i4A: 16/03/2010 2:49
&,%s*L: "davidytk"<davidytk_at_netvigator.com>, <ccielab_at_groupstudy.com>
%D&.: RE: CME problem with H323 GW

What is the called number in debug isdn q931 (assuming that you have PRI) ?
What is the output of the command: show dialplan number (numbere from #1
here) ? check the "session-target" and "voice-port" part of the output.
Is DID configured on incoming PSTN dial peer? This will affect how digits
are delivered and dial peers match.

I also think that local ephone will win in this case.

What is the meaning of "presence" keyword in your sample config?

Adel Abouchaev, CCIE# 12037, CISSP, MCSE

Technical Support Engineer
Netmasterclass LLC, Cisco Learning Partner
RFC821: adel_at_netmasterclass.net
E.164: +18886772669
HTTP: www.netmasterclass.net

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
davidytk
Sent: Monday, March 15, 2010 8:56 AM
To: ccielab_at_groupstudy.com
Subject: CME problem with H323 GW

Hi all

I find a problem on CME with H323 GW. I have configured the following
command. As I need to configure call-park under SRST, I use
telephone-service instead of call-manager fallback command. I got a problem
that when PSTN phone call 24094001, it always choose the number under
ephone-dn instead going to dial-peer ( I have configure preference 1 on
dial-peer). Any one know how to solve this.

Telephone-service

Srst mode auto-provision none

Max-dn 10

Max-ephone 2

Ip source-route .X.X.X.X port 2000

dial-pattern 1 24094. extension 4

voicemail 4220

ephone-dn 1

number 4001

presence 9

ephone-dn 2

number 4002

presence 9

voice class coded 1

codec preference 1 g711ulaw

codec preference 2 g729r8

codec preference 3 g711ulaw

voice class h323 1

h225 timeout tcp establish 3

dial-peer voice 4000 voip

destination-pattern 24094.

session-target ipv4:142.9.64.11

voice-class codec 1

voice-class h323 1

dtmf-relay h245-alphanumeric

presence 1

thanks

Best Regards

David

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 16 2010 - 10:31:41 ART