Re: OT: Cisco 1242AG AP's missing Dot1Radio Interfaces when

Please check the country settings in your Wireless Controller. If their is a
mismatch between your controller and AP (Regulatory domain), the radios will
be shutdown by the controller. You can add multiple countries at a time for
testing. Please check this link:

https://supportforums.cisco.com/thread/1001756.pdf;jsessionid=CF2B22E6612C182A8EA9911B2D982687.node0

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps4555_Products_Data_Sheet.html

I would also try a factory reset

http://www.cisco.com/en/US/docs/wireless/access_point/12.2_13_JA/configuration/guide/s13trb_ps4570_TSD_Products_Configuration_Guide_Chapter.html#wp1036746

Regards

Farrukh

On Sat, Mar 13, 2010 at 1:47 AM, Joseph L. Brunner
<joe_at_affirmedsystems.com>wrote:

> Good afternoon,
>
> We have a few 1242AG's LAP's -> (AIR-LAP-1242AG-A-AG) that were purchased,
> connected to the controller downloaded
>
> c1240-rcvk9w8-tar.124-21a.JA2.tar
>
> When we now look at these AP's they won't register with the controller
> (4402
> running the following-
>
> Manufacturer's Name.............................. Cisco Systems Inc.
> Product Name..................................... Cisco Controller
> Product Version.................................. 6.0.196.0
> RTOS Version..................................... 6.0.182.0
> Bootloader Version............................... 4.2.205.0
> Emergency Image Version.......................... N/A
> Build Type....................................... DATA + WPS)
>
> And they dont show their dot1radio interfaces-
>
> Show Vers# (omitted)
> cisco AIR-LAP1242AG-A-K9 (PowerPCElvis) processor (revision A0) with
> 24566K/8192K bytes of memory.
> Processor board ID FTX1337B0LC
> PowerPCElvis CPU at 262Mhz, revision number 0x0950
> Last reset from power-on
> LWAPP image version 6.0.196.0
> 1 FastEthernet interface
>
> However, of course, we convert them back to Autonomous mode - we do see
> dot1radio interfaces, and can successfully manually create ssid's with
> authentication)
>
> Any ideas?
>
> Thanks!
>
> -Joe
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Mar 13 2010 - 09:39:00 ART