Re: BGP Path Selection attribute.

This is not shown by any "show" command that I am aware of.

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Community: http://www.ipexpert.com/communities
:: Sent from my phone. Apologies for errors and brevity. ::
On 18 Feb 2010, at 12:38, "Kashif.Nadeem/Engineering - Network  
Operations & Quality/Lahore" <Kashif.Nadeem_at_Waridtel.com> wrote:
> R2#sh ip bgp
> BGP table version is 2, local router ID is 3.1.1.1
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal,
>              r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
>   Network          Next Hop            Metric LocPrf Weight Path
> * i10.1.1.1/32      3.1.1.2                  0    100      0 10 i
> *>i                 2.1.1.1                  0    100      0 10 i
> R2#
>
> --------------------------------------------------------------------
>
>
> Guys please tell me which command will be used to see that which
> attribute of BGP is being used in path selection of BGP ,e.g
>
> Route 10.1.1.1/32 in above is coming best and valid from 2.1.1.1 due  
> to
> its lower router-id but I want to check where this thing is  
> mentioned in
> show command of BGP that this route is best due to lower router id.
>
>
> BR
>
> Kashif
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
 
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net