Re: OT:Voice Gateway & CUCM Problem

hi,

I have an FXO port connected to PSTN. I am trying to place a call from
outside to inside by just dialling into the analog port number, which after
a couple of rings opens a secondary tone and then I dial an internal
extension. The problem I am facing is related to digit collection; where the
digits I am dialling are not always the digits I see in the debug voice
dial-peer inout for a reason I can't understand and this leads to the call
being unrouted properly. I have tried this without TCL script (by dialling
into analog line which opens secondary dial tone) and with TCL script
(simple script which just welcomes the caller and asks him to put
extension).The weird thing is that it works sometimes & other times it
doesn't work.

Any help will be much appreciated!

Best Regards.

On Tue, Feb 16, 2010 at 2:20 PM, mohammed shoeb ahmed <mdshoeb_at_gmail.com>wrote:

> Would you please clarify what you are trying to achieve here, if you are
> testing auto attendant then "Connection Plar 600" would be needed under your
> voice ports.
>
>
>
> --
> Best Regards,
>
> Mohammed Shoeb Ahmed
>
> Sr. Consultant,
> CCIE 18379
>

-- 
KJ
Blogs and organic groups at http://www.ccie.net