Re: RIP V1 VLSM

Hi Tony!
Of course /16 subnets will be being sent out. Rip is although a /8 in v1 but
it has property to send updates around major network boundery, which in this
case is /16.
I have done the lab and confirmed it.

HTH

On Tue, Feb 16, 2010 at 8:09 PM, Tony Schaffran (GS) <
groupstudy_at_cconlinelabs.com> wrote:

> I do not think RIPv1 will be sending /16
>
> RIPv1 is classless and 10.x.x.x is /8
>
> Have you configured this in a lba to see for yourself?
>
> Tony Schaffran
> Sr. Network Consultant
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> CCOnlineLabs
> Your #1 choice for online Cisco rack rentals.
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Nadeem Rafi
> Sent: Tuesday, February 16, 2010 8:53 AM
> To: Sarad
> Cc: Cisco certification
> Subject: Re: RIP V1 VLSM
>
> you will not be able to see /24 as rip v1 will be sending /16 major network
> only.
>
> HTH
>
> On Tue, Feb 16, 2010 at 7:39 PM, Sarad <tosara_at_gmail.com> wrote:
>
> > Hi Expert,
> >
> > If I have the following scenario, that is two routers connected back to
> > back
> > with a 10 range /16 ip & there are two loopbacks configured on each
> router
> > with the same class IPs. If I run RIPV1 on this. Will it advertise my
> > loopbacks to each other.
> >
> > R1
> > R2
> > S0 - 10.1.0.1/16 <---------------------------> S0 -10.1.0.2/16
> > L0 - 10.2.0.1/24 L0 -
> 10.3.0.1/24
> >
> > Regards
> > Sara
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 16 2010 - 20:15:23 ART