I am not seeing a reason that you can't use the loopback as the source or
one of the sub-interfaces. As long as you are not advertising your
originating networks over the DMVPN neither scenario should be a problem for
you. If you are then that is the reason you are having problems.
Regards,
Tyson Scott - CCIE #13513 R&S, Security, and SP
Technical Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com
Telephone: +1.810.326.1444, ext. 208
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130
-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of NeT
Sent: Tuesday, February 09, 2010 8:04 AM
To: Cisco certification
Subject: DMVPN
I have problem with MGRE tunnel if use loopback as a source on hun router.
I can't use any physical IP since having sub-interface for each branch. any
idea to how to solve this problem?
interface Tunnel0
description HUB_Router
bandwidth 1000000
ip address 10.8.115.1 255.255.255.0
no ip redirects
ip mtu 1400
ip nhrp authentication VNP_at_123
ip nhrp map multicast dynamic
ip nhrp network-id 105600
ip nhrp holdtime 300
ip ospf network broadcast
ip ospf hello-interval 30
ip ospf priority 200
tunnel source Loopback0
tunnel mode gre multipoint
tunnel key 105600
tunnel protection ipsec profile vpn-dmvpn
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key dm!VPN@ address 0.0.0.0 0.0.0.0
interface Loopback0
description Connect_to_Spoke1
ip address 172.17.0.97 255.255.255.255
interface FastEthernet0/0.14
encapsulation dot1Q 401
ip address 10.8.14.1 255.255.255.0
!
interface FastEthernet0/0.15
description Connect_to_Spoke2
encapsulation dot1Q 501
ip address 10.8.15.1 255.255.255.0
_______________________________________
interface Tunnel0
description SPOKE1
bandwidth 192
ip address 10.8.115.4 255.255.255.0
ip mtu 1400
ip nhrp authentication VNP_at_123
ip nhrp map multicast 172.17.0.97
ip nhrp map 10.8.115.1 172.17.0.97
ip nhrp network-id 105600
ip nhrp holdtime 300
ip nhrp nhs 10.8.115.1
ip ospf network broadcast
ip ospf hello-interval 30
ip ospf priority 0
tunnel source 10.8.14.4
tunnel destination 10.8.14.1
tunnel key 105600
tunnel protection ipsec profile vpn-dmvpn
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key dm!VPN@ address 0.0.0.0 0.0.0.0
interface FastEthernet0/0
ip address 10.8.14.4 255.255.255.0
-- Regards, Blogs and organic groups at http://www.ccie.netReceived on Tue Feb 09 2010 - 09:01:40 ART
This archive was generated by hypermail 2.2.0 : Mon Mar 01 2010 - 06:28:35 ART