RE: I have a an MGCP gateway registered with CUCM it keep

Amin,

        Could you check:

        - Does it happen at about 30 seconds after the MGCP gateway is
registered?
        - Check the "show ccm-manager" output.
        - Do you see the gateway as Registered with CUCM in CUCM dashboard?
        - Do you see the gateway as Registered in show ccm-manager?
        - Check that CUCM doesn't experience CPU spikes during the time when
MGCP gateway becomes unregistered.
        
        Are you running Call Manager on VM? If yes, and if you are running
both pub and sub, then:

        - that CUCM doesn't have replication issues (use SSH to go to admin
shell and check replication status using: utils dbreplication
status)

        You can also have a look at: debug mgcp (errors|events|packets) or
debug mgcp all (this could generate a lot of stuff).

Cheers,

Adel Abouchaev, CCIE# 12037, CISSP, MCSE

Technical Support Engineer
Netmasterclass LLC, Cisco Learning Partner
RFC821: adel_at_netmasterclass.net
E.164: +18886772669
HTTP: www.netmasterclass.net

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of CCIE
Sent: Wednesday, February 03, 2010 11:27 AM
To: 'groupstudy'
Subject: I have a an MGCP gateway registered with CUCM it keep altering
between registered and unregistered.

Hi experts,

I have a an MGCP gateway registered with CUCM it keep altering between
registered and unregistered.

Any advice about that?

Regards,

Amin

Blogs and organic groups at http://www.ccie.net
Received on Wed Feb 03 2010 - 13:16:36 ART