RE: What about the troubleshooting part - allowed commands

I guess no one has ever watched Nick Burns on SNL.

http://thetravisty.com/Saturday_Night_Live/wmv/Nick_Burns_with_Jackie_Chan.h
tm
http://www.hulu.com/watch/19050/saturday-night-live-nick-burns

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP
Technical Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com
Telephone: +1.810.326.1444, ext. 208
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130

-----Original Message-----
From: Tyson Scott [mailto:tscott_at_ipexpert.com]
Sent: Wednesday, January 27, 2010 2:06 PM
To: 'Brad Ellis'; 'Dan Shechter'; 'CCIE-Newbie'
Cc: 'Cisco certification'
Subject: RE: What about the troubleshooting part - allowed commands

Even worse than that I heard from a recent student that in the new iteration
of the lab on one of the routers if you type in the wrong command it prints
on the screen "This guy's so stupid he doesn't even understand JAVA or
HTML... MOVE" and it just destroys your confidence. "I don't like that
guy."

;)

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Brad
Ellis
Sent: Wednesday, January 27, 2010 12:45 PM
To: Dan Shechter; CCIE-Newbie
Cc: Cisco certification
Subject: RE: What about the troubleshooting part - allowed commands

I think he's referring to an "old wives tale" about when the CCIE lab
first came out - it was rumored that Cisco had a special IOS running
which disabled the equivalent of a show run. It was just rumors, but
funny, nonetheless.

thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI# 30482
CEO / President
CCBOOTCAMP - Cisco Learning Solutions Partner (CLSP)
Email: brad_at_ccbootcamp.com
Toll Free: 877-654-2243
International: +1-702-968-5100
Skype: skype:ccbootcamp?call
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Training And Remote Racks: http://www.ccbootcamp.com

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Dan Shechter
Sent: Wednesday, January 27, 2010 9:35 AM
To: CCIE-Newbie
Cc: Cisco certification
Subject: Re: What about the troubleshooting part - allowed commands

Hi Dennis,

I have never heard of such a restriction.

A good trouble-shooting technique is always a combination of "show run"
commands, and other show and debug commands.

For example: sometimes its so much easier to troubleshoot by comparing
configurations of two routers.

There are even some TS tasks which you just can't use show commands to
solve, as they can't be tested in the lab, such as some IP services,
some
QoS tasks... etc.

At the end, you will always need the "show run" command to verify that
the
fix you want to apply to the running configuration actually makes sense.

Note: never use just "show run". You always need to be more specific,
like
"show run | section eigrp". To be more specific, you will need the other
show commands.

Last, but not least, make sure you practice TS labs only after you have
finished all other practice labs. You will really need all your skills
to do
TS.

HTH,
Dan #13685 (RS/Sec/SP)
Troubleshooting blog: http://dans-net.com

On Sat, Jan 9, 2010 at 4:04 PM, andy thomas <thomasandy32_at_gmail.com>
wrote:

> Hello
>
> Diagram:
> ISP-1
ISP-1
> |
> |
> |
> |
> CORE-1-------------CORE-2
> |
> |
> |
> |
> |
> |
> PE-2
PE-1
> 10.28.40.41/29 | |
> 10.28.40.33/29
> |
|
> .42 |
|
> .34
> firewall-2
> firewall-1
> |
> |
> |
> |
>
> ----------------------------------
> |
> WEB SERVER
(10.10.10.1)
>
> I want to route traffic to web server I'm using static routes pointing
to a
> respective next-hop on a particular router,the devices on customer end
> firewall is ASA, customer has asked for the preferred interface from
> firewall-1, i have configured that by increasing the local preference
of
> the
> route
>
> The link between the distribution switches and the core is MPLS and
the
> customer is configured in the VRF.
>
> Now the issue is:
>
> customer says that when the firewall-1 fails firewall-2 will be
active by
> the same inside interface IP of firewall-1, if it so then all the
traffic
> destined to web server from PE-2 to a next-hop 10.28.40.42 will
drop,so in
> this situation what techniques we shld apply,The subnet between the 2
> firewall are different.
>
>
> Any link or configuration example which will help me.
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
>
Received on Wed Jan 27 2010 - 16:01:59 ART