Re: DMVPN eigrp flap issue...

I gave bandwidth 128000 on the tunnel at hub and cleared eigrp neigh but Q
count still 1

--- On Tue, 26/1/10, Olaniyi Sonubi <sonubi02_at_gmail.com> wrote:

From: Olaniyi Sonubi <sonubi02_at_gmail.com>
Subject: Re: DMVPN eigrp flap issue...
To: "Naufal Jamal" <naufalccie_at_yahoo.in>
Cc: "Farrukh Haroon" <farrukhharoon_at_gmail.com>, ccielab_at_groupstudy.com
Date: Tuesday, 26 January, 2010, 1:52 PM

Naufal,

Put a bandwidth statement on the tunnel at the hub.

HTH.

'Niyi CCIE#23833

On Tue, Jan 26, 2010 at 2:24 PM, Naufal Jamal <naufalccie_at_yahoo.in> wrote:

Hi ,

I am reaching the destination thru eigrp...

I am using eigrp on FR network to exchange the routing info between the

spokes.i removed eigrp from the FR and getting the following. I wish to keep

eigrp as the protocol for both dmvpn and FR cos I have seen it working on a

customer network...

HUB(config-router)#do sh ip eigrp ne

IP-EIGRP neighbors for process 10

H Address Interface Hold Uptime SRTT RTO Q Seq

Typ

e

                                            (sec) (ms) Cnt Num

1 10.0.0.2 Tu0 11 00:00:59 1 5000 1 0

0 10.0.0.3 Tu0 13 00:01:11 1 5000 1 0

retry limit exceeded message coming up...

--- On Tue, 26/1/10, Farrukh Haroon <farrukhharoon_at_gmail.com> wrote:

From: Farrukh Haroon <farrukhharoon_at_gmail.com>

Subject: Re: DMVPN eigrp flap issue...

To: "Naufal Jamal" <naufalccie_at_yahoo.in>

Cc: ccielab_at_groupstudy.com

Date: Tuesday, 26 January, 2010, 12:17 PM

How are you reaching the tunnel destination? Through EIGRP, another IGP or

static routes?

Regards

Farrukh

On Tue, Jan 26, 2010 at 3:06 PM, Naufal Jamal <naufalccie_at_yahoo.in> wrote:

Hey Experts,

I need some valuable help from you on the scenario below:

1) I am working out dmvpn PHASE 1 on gns3.with 1 HUB and 2 spokes..

2)I have advertised 1.1.1.0 and 10.0.0.0 networks in eigrp

I have given "eigrp stub connected" on both the spokes.

MY eigrp neigh looks like this:

HUB#sh ip eigrp ne

IP-EIGRP neighbors for process 10

H Address Interface Hold Uptime SRTT RTO Q Seq

Typ

e

                                            (sec) (ms) Cnt Num

3 10.0.0.2 Tu0 13 00:00:06 1 4500 1 0

2 10.0.0.3 Tu0 11 00:00:12 1 5000 1 0

1 1.1.1.3 Se0/0.1 151 00:12:27 1 5000 0 14

0 1.1.1.2 Se0/0.1 142 00:12:51 372 2232 0 13

2)FR works fine but my neighborships flap like anything..

PLS LET ME KNOW IF YOU WANT ANY DEBUG OUTPUTS ON THIS SCENARIO....

HUB#sh run int s0/0.1

Building configuration...

Current configuration : 188 bytes

!

interface Serial0/0.1 multipoint

 ip address 1.1.1.1 255.255.255.0

 no ip split-horizon eigrp 10

 frame-relay map ip 1.1.1.2 101 broadcast

 frame-relay map ip 1.1.1.3 301 broadcast

end

interface Tunnel0

 ip address 10.0.0.1 255.255.255.0

 no ip redirects

 ip nhrp authentication cisco

 ip nhrp map multicast dynamic

 no ip split-horizon eigrp 10

 tunnel source Serial0/0.1

 tunnel mode gre multipoint

 tunnel key 123

end

------

SPOKE 1

interface Tunnel0

 ip address 10.0.0.3 255.255.255.0

 no ip redirects

 ip nhrp authentication cisco

 ip nhrp map multicast 1.1.1.1

 ip nhrp map 10.0.0.1 1.1.1.1

 ip nhrp nhs 10.0.0.1

 tunnel source Serial0/0

 tunnel destination 1.1.1.1

 tunnel key 123

end

SPOKE1(config)#do sh run int s0/0

Building configuration...

Current configuration : 224 bytes

!

interface Serial0/0

 ip address 1.1.1.3 255.255.255.0

 encapsulation frame-relay

 serial restart_delay 0

 frame-relay map ip 1.1.1.1 401 broadcast

 frame-relay map ip 1.1.1.2 401 broadcast

 no frame-relay inverse-arp

end

SPOKE1(config)#

------

SPOKE2

interface Tunnel0

 ip address 10.0.0.2 255.255.255.0

 no ip redirects

 ip nhrp authentication cisco

 ip nhrp map multicast 1.1.1.1

 ip nhrp map 10.0.0.1 1.1.1.1

 ip nhrp nhs 10.0.0.1

 tunnel source Serial0/0

 tunnel destination 1.1.1.1

 tunnel key 123

end

SPOKE2(config)#do sh run int s0/0

Building configuration...

Current configuration : 224 bytes

!

interface Serial0/0

 ip address 1.1.1.2 255.255.255.0

 encapsulation frame-relay

 serial restart_delay 0

 frame-relay map ip 1.1.1.1 201 broadcast

 frame-relay map ip 1.1.1.3 201 broadcast

 no frame-relay inverse-arp

end

      The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.

http://in.yahoo.com/

Blogs and organic groups at http://www.ccie.net
Received on Tue Jan 26 2010 - 19:38:59 ART