Re: Import map not working

Hi

I do not understand why would *import map NOT* work and normal route-target
import 100:100 work in this scenario. Any explanation to this?

R3#sh ip bgp v all 10.10.10.10
BGP routing table entry for 10:10:10.10.10.10/32, version 0
Paths: (1 available, no best path)
  Not advertised to any peer
  Local
    0.0.0.0 from 0.0.0.0 (150.1.3.3)
      Origin incomplete, metric 0, localpref 100, weight 32768, valid,
sourced
      Extended Community: RT:10:10 RT:100:100,
      mpls labels in/out nolabel/aggregate(man)

R6(config-router)#no bgp default route-target filter
R6#sh ip bgp v all 10.10.10.10
BGP routing table entry for 10:10:10.10.10.10/32, version 9
Paths: (1 available, best #1, no table)
Flag: 0x820
  Not advertised to any peer
  123
    150.1.24.2 (metric 20) from 150.1.5.5 (150.1.5.5)
      Origin incomplete, metric 0, localpref 100, valid, internal, best
      Extended Community: RT:10:10 RT:100:100
      Originator: 150.1.4.4, Cluster list: 150.1.5.5,
      mpls labels in/out nolabel/20
I am using Cisco IOS Software, 3600 Software (C3640-JK9O3S-M), Version
12.3(14)T7
On Sat, Jan 23, 2010 at 5:14 PM, Kanna shankar <ccie9999_at_googlemail.com>wrote:

> Hi,
>
> Can you verify that prefix is patched with the RT 100:100 at R3?
>
> Regards,
> Kann

Blogs and organic groups at http://www.ccie.net
Received on Sat Jan 23 2010 - 18:44:00 ART