Re: MDT not forming tunnel

You have VRF with the same default MDT configured on both PEs?

On Sat, Jan 23, 2010 at 00:32, JR Garcia <ttuner_at_gmail.com> wrote:
> i can, yes.
>
> PE1:
> interface Loopback1
> B ip address 2.2.2.2 255.255.255.255
> B ip router isis
> B ip pim sparse-mode
> B ip igmp join-group 224.1.1.1
> end
>
> PE2:
> R3#ping 224.1.1.1
>
> Type escape sequence to abort.
> Sending 1, 100-byte ICMP Echos to 224.1.1.1, timeout is 2 seconds:
>
> Reply to request 0 from 192.168.23.2, 84 ms
>

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Community: http://www.ipexpert.com/communities
Blogs and organic groups at http://www.ccie.net