Re: Cisco Switch 6509 rommon mode [7:137977]

Hi, i cleaned the modules of 6509 and reinstalled, it shows

inband gmac link did not come up: reseting the system
System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 262144 Kbytes of main memory

Autoboot executing command: "boot bootflash:"

Self decompressing the image :
##############################################################################################################]

System Power On Diagnostics
DRAM Size ..........................256 MB
Testing DRAM .......................Passed
Verifying Text Segment .............Passed
NVRAM Size .........................512 KB
Level2 Cache .......................Present
Level3 Cache .......................Present
System Power On Diagnostics Complete

Currently running ROMMON from S (Gold) region
Boot image: bootflash:cat6000-sup2cvk9.8-3-2.bin

System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.

Warning: Rommon NVRAM area is corrupted. Initialize the area to default
values
c6k_sup2 processor with 262144 Kbytes of main memory

Autoboot: failed, BOOT string is empty
rommon 1 >
rommon 1 >

After this, if i execute the command BOOT, once again it is showing old log
as
below.

Regards,
Manoj

On Wed, Jan 20, 2010 at 6:31 PM, Jon Wagner <Jon.Wagner_at_infocision.com>wrote:

> You have an ASIC failure. I would suggest calling TAC and getting a new
> card.
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> manoj prajapati
> Sent: Wednesday, January 20, 2010 6:31 AM
> To: cisco_at_groupstudy.com
> Subject: Cisco Switch 6509 rommon mode [7:137977]
>
> Hi, i am using cisco 6509 switch. This switch is not power ON for last
> one
> year, now after switch ON,It is going to ROMMON mode.
>
>
> The following is the log:
>
> Currently running ROMMON from S (Gold) region
> Boot image: bootflash:cat6000-sup2cvk9.8-3-2.bin
> Module 1 port ASIC 0 failed: Pinnacle Packet Buffer Error
> Module 1 reported following ports unusable
> port 1 bad
> port 2 bad
> port 3 bad
> port 4 bad
> inband gmac link did not come up: reseting the system
> System Bootstrap, Version 7.1(1)
> Copyright (c) 1994-2001 by cisco Systems, Inc.
> c6k_sup2 processor with 262144 Kbytes of main memory
>
> Autoboot executing command: "boot bootflash:cat6000-sup2cvk9.8-3-2.bin"
>
> Self decompressing the image :
>
> ########################################################################
> ######################################]
>
>
> System Power On Diagnostics
> DRAM Size ..........................256 MB
> Testing DRAM .......................Passed
> Verifying Text Segment .............Passed
> NVRAM Size .........................512 KB
> Level2 Cache .......................Present
> Level3 Cache .......................Present
> System Power On Diagnostics Complete.
>
> ---------------------------------------------------------
>
> I tried the following commands:
> 1.boot
> 2.boot bootflash:cat6000-sup2cvk9.8-3-2.bin
> 3.I thought ios may be damaged, so i used XMODEM to upload IOS image,
> but
> after some time, it is also failing.
>
> Regards,
> Manoj P.
> ________________________________
>
> avast! Antivirus <http://www.avast.com> : Outbound message clean.
>
> Virus Database (VPS): 100120-0, 01/20/2010
> Tested on: 1/20/2010 8:01:50 AM
> avast! - copyright (c) 1988-2010 ALWIL Software.

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 20 2010 - 19:32:10 ART