Hi Bryan
Yep, I'm using Dynamips. My FRSW uses DLCI for both links, 101.
PE1(config)#do sh mpl l2 v de
Local interface: Se1/0 up, line protocol up, FR DLCI 101 up
MPLS VC type is FR DLCI, interworking type is Ethernet
Destination address: 2.2.2.2, VC ID: 100, VC status: up
Preferred path: not configured
Default path: active
Next hop: point2point
Output interface: Se1/1, imposed label stack {32}
Create time: 00:03:39, last status change time: 00:01:33
Signaling protocol: LDP, peer 150.1.2.2:0 up
Targeted Hello: 1.1.1.1(LDP Id) -> 2.2.2.2
MPLS VC labels: local 34, remote 32
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 7, send 46
byte totals: receive 1070, send 2760
packet drops: receive 0, seq error 0, send 0
PE1(config)#do sh mpls ldp ne
Peer LDP Ident: 150.1.2.2:0; Local LDP Ident 1.1.1.1:0
TCP connection: 150.1.2.2.15475 - 1.1.1.1.646
State: Oper; Msgs sent/rcvd: 13/13; Downstream
Up time: 00:04:39
LDP discovery sources:
Serial1/1, Src IP addr: 150.1.12.2
Targeted Hello 1.1.1.1 -> 2.2.2.2, active
Addresses bound to peer LDP Ident:
150.1.12.2 150.1.2.2 2.2.2.2
My .net file below.
autostart = False
[localhost:7200]
workingdir = C:\Program Files\GNS3
udp = 10000
[[7200]]
image = C:\Program Files\Dynamips\images\c7200-k3p-mz.120-33.S3.bin
idlepc = 0x6067ef6c
ghostios = True
[[FRSW FR0]]
1:101 = 2:101
2:101 = 1:101
x = -28.5
y = -248.5
[[ROUTER pe1]]
console = 2001
cnfg = C:\Program Files\Dynamips\iw-fr-vlan-b\pe1.cfg
slot1 = PA-8T
s1/0 = FR0 2
s1/1 = pe2 s1/0
x = -285.0
y = -258.0
[[ROUTER ce1]]
console = 2003
cnfg = C:\Program Files\Dynamips\iw-fr-vlan-b\ce1.cfg
slot1 = PA-8T
s1/0 = FR0 1
x = 214.0
y = -231.0
[localhost:7201]
workingdir = C:\Program Files\GNS3
udp = 10100
[[7200]]
image = C:\Program Files\Dynamips\images\c7200-k3p-mz.120-33.S3.bin
idlepc = 0x6067ef6c
ghostios = True
[[ROUTER pe2]]
console = 2005
cnfg = C:\Program Files\Dynamips\iw-fr-vlan-b\pe2.cfg
slot1 = PA-8T
s1/0 = pe1 s1/1
slot2 = PA-2FE-TX
f2/0 = ce2 f1/0
x = -289.0
y = 5.0
[[ROUTER ce2]]
console = 2007
cnfg = C:\Program Files\Dynamips\iw-fr-vlan-b\ce2.cfg
slot1 = PA-2FE-TX
f1/0 = pe2 f2/0
x = 206.0
y = -4.0
[GNS3-DATA]
configs = C:\Program Files\Dynamips\iw-fr-vlan-b
On Tue, Jan 12, 2010 at 9:39 PM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:
> What does your frame-relay switch config look like? Is this dynamips? If
> see, let's see the .net file.
>
> Thanks,
>
> On Tue, Jan 12, 2010 at 12:07 PM, Service Provider <
> service.providersa_at_gmail.com> wrote:
>
>> Hi all
>>
>> I have setup FR-VLAN Interworking and my l2 tunnel is up but cannot ping
>> between CE sites.
>>
>>
>> CE1-----FRSW-------PE1-----------------PE2---------------------VLAN100--------------------CE2
>>
>> Configs below, please help....tx.
>>
>> CE1#
>> CE1#sh run
>> Building configuration...
>>
>> Current configuration : 1912 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname CE1
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> enable password cisco
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> no ip domain-lookup
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> no mpls traffic-eng auto-bw timers frequency 0
>> bridge irb
>> !
>> !
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> no clns route-cache
>> !
>> interface Serial1/0
>> no ip address
>> no ip directed-broadcast
>> encapsulation frame-relay
>> serial restart-delay 0
>> no clns route-cache
>> frame-relay map bridge 101 broadcast
>> frame-relay map bridge 100 broadcast
>> no frame-relay inverse-arp
>> bridge-group 1
>> !
>> interface Serial1/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/2
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/3
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/4
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/5
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/6
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/7
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface BVI1
>> ip address 10.10.10.1 255.255.255.0
>> no ip directed-broadcast
>> no clns route-cache
>> !
>> ip classless
>> !
>> !
>> !
>> control-plane
>> !
>> bridge 1 protocol ieee
>> bridge 1 route ip
>> !
>> line con 0
>> exec-timeout 0 0
>> privilege level 15
>> logging synchronous
>> stopbits 1
>> line aux 0
>> exec-timeout 0 0
>> privilege level 15
>> stopbits 1
>> line vty 0 4
>> password cisco
>> login
>> !
>> no cns aaa enable
>> end
>>
>>
>> ce2#
>> ce2#sh run
>> Building configuration...
>>
>> Current configuration : 810 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname ce2
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> !
>> !
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> !
>> interface FastEthernet1/0
>> no ip address
>> no ip directed-broadcast
>> duplex half
>> speed auto
>> !
>> interface FastEthernet1/0.100
>> encapsulation dot1Q 100
>> ip address 10.1.12.2 255.255.255.0
>> no ip directed-broadcast
>> !
>> interface FastEthernet1/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> duplex half
>> speed auto
>> !
>> ip classless
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> line con 0
>> exec-timeout 0 0
>> logging synchronous
>> stopbits 1
>> line aux 0
>> stopbits 1
>> line vty 0 4
>> login
>> !
>> no cns aaa enable
>> end
>>
>> PE1#sh run
>> Building configuration...
>>
>> Current configuration : 2311 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname PE1
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> enable password cisco
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> no ip domain-lookup
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> mpls label protocol ldp
>> no mpls traffic-eng auto-bw timers frequency 0
>> frame-relay switching
>> !
>> !
>> pseudowire-class l2inter
>> encapsulation mpls
>> interworking ethernet
>> !
>> pseudowire-class INTERWORKING
>> encapsulation mpls
>> interworking ethernet
>> !
>> !
>> interface Loopback0
>> ip address 1.1.1.1 255.255.255.255
>> no ip directed-broadcast
>> no clns route-cache
>> !
>> interface Loopback1
>> no ip address
>> no ip directed-broadcast
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> no clns route-cache
>> !
>> interface Serial1/0
>> no ip address
>> no ip directed-broadcast
>> encapsulation frame-relay
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/1
>> ip address 150.1.12.1 255.255.255.0
>> no ip directed-broadcast
>> mpls label protocol ldp
>> tag-switching ip
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/2
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/3
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/4
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/5
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/6
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> interface Serial1/7
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> no clns route-cache
>> !
>> router ospf 1
>> router-id 1.1.1.1
>> log-adjacency-changes
>> network 1.1.1.1 0.0.0.0 area 0
>> network 13.13.13.1 0.0.0.0 area 0
>> network 0.0.0.0 255.255.255.255 area 0
>> !
>> ip classless
>> !
>> !
>> connect FR-VLAN-IW Serial1/0 101 l2transport
>> xconnect 2.2.2.2 100 pw-class INTERWORKING
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> line con 0
>> exec-timeout 0 0
>> privilege level 15
>> logging synchronous
>> stopbits 1
>> line aux 0
>> exec-timeout 0 0
>> privilege level 15
>> stopbits 1
>> line vty 0 4
>> password cisco
>> login
>> !
>> no cns aaa enable
>> end
>>
>>
>>
>> pe2#sh run
>> Building configuration...
>>
>> Current configuration : 1997 bytes
>> !
>> version 12.0
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname pe2
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> ip subnet-zero
>> !
>> !
>> ip cef
>> no ip domain-lookup
>> ip ssh time-out 120
>> ip ssh authentication-retries 3
>> !
>> !
>> pseudowire-class l2inter
>> encapsulation mpls
>> interworking ethernet
>> !
>> !
>> interface Loopback0
>> ip address 150.1.2.2 255.255.255.255
>> no ip directed-broadcast
>> !
>> interface Loopback2
>> ip address 2.2.2.2 255.255.255.255
>> no ip directed-broadcast
>> !
>> interface FastEthernet0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> !
>> interface Serial1/0
>> ip address 150.1.12.2 255.255.255.0
>> no ip directed-broadcast
>> mpls label protocol ldp
>> tag-switching ip
>> serial restart-delay 0
>> !
>> interface Serial1/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/2
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/3
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/4
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/5
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/6
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface Serial1/7
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> serial restart-delay 0
>> !
>> interface FastEthernet2/0
>> no ip address
>> no ip directed-broadcast
>> no keepalive
>> duplex half
>> speed auto
>> !
>> interface FastEthernet2/0.100
>> encapsulation dot1Q 100
>> no ip directed-broadcast
>> xconnect 1.1.1.1 100 pw-class l2inter
>> !
>> interface FastEthernet2/1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>> duplex half
>> speed auto
>> !
>> router ospf 1
>> log-adjacency-changes
>> network 0.0.0.0 255.255.255.255 area 0
>> !
>> ip classless
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> line con 0
>> exec-timeout 0 0
>> logging synchronous
>> stopbits 1
>> line aux 0
>> stopbits 1
>> line vty 0 4
>> login
>> !
>> no cns aaa enable
>> end
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Bryan Bartik
> CCIE #23707 (R&S, SP), CCNP
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
Blogs and organic groups at http://www.ccie.net
Received on Tue Jan 12 2010 - 21:55:04 ART
This archive was generated by hypermail 2.2.0 : Thu Feb 04 2010 - 20:28:41 ART