RE: How to remove the offset-list in RIP?? Seriously..

Miroslav,

> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Miroslav Kosut
> Sent: Wednesday, January 06, 2010 7:26 AM
>
> this is only a visage problem. The worse one is with 3560 - If you have
> an access to 3560 with recent IOS, try to put a multiline "vacant-
> message" in "line con" mode. The switch will reboot.. :-)) I did it on
> two different boxes.
>

What do you consider recent IOS? I tested this on 12.2(44)SE6 and it worked out fine.

Rack1SW1(config-line)#do show ver | i IOS
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(44)SE6, RELEASE SOFTWARE (fc1)

Rack1SW1(config-line)#do show run | b line con 0
line con 0
 exec-timeout 0 0
 privilege level 15
 logging synchronous
 vacant-message ^C
### Test of a multi line vacant message ###
### Will this fail?? ###
^C

-ryan

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 06 2010 - 14:17:02 ART