Re: How to remove the offset-list in RIP?? Seriously..

I understand your point .. u can call this is cli bug .. but there are
so many places ..
lemme explain how to look at this :

Point 1
=========
I guess u will agree to point that there can b 1 and only 1 offset
list on rip procedure .

Point 2
======
If u apply a offset-list say "test" and then apply offset-list "new"
.. the OL "new" overwrites "test"

C2900(config-router)#do sh run | sec rip
router rip
 offset-list test in 15
 network 10.0.0.0
C2900(config-router)#
C2900(config-router)#offset-list new in 14
C2900(config-router)#do sh run | sec rip
router rip
 offset-list new in 14
 network 10.0.0.0
C2900(config-router)#

Point 3
=======
Since there can be 1 and only 1 offset list that can be applied to rip
process ; while removing this ; CLI should not give any option .
i.e following makes more sense

router rip
no offset-list {in|out} ?
<cr>

This shd take care of removing offset list in IN / OUT direction.
although this is not the implementation ( rightly caught ) .. but one
shd not get confused ..

Hence
if u have "offset-li in TEST 15" applied
and you say

no offset-list in NEW

it will take away your TEST

HTH
Gaurav Madan
CCIE
On Wed, Jan 6, 2010 at 5:34 PM, Miroslav Kosut <miroslav.kosut_at_me.com> wrote:
> Hello,
>
> just in case someone is interested ...
>
> I've been playing with RIP for a while and I found a small CLI bug. I configured the offset-list with named ACL. I got the expected behaviour, no problem with that. Then I was to remove the offset list, but here is what I found:
>
> R2(config-router)#no offset-list ?
> <0-99> Access list of networks to apply offset (0 selects all networks)
> <1300-1999> Access list of networks to apply offset (expanded range)
>
> R2(config-router)#no offset-list
>
> Oops :-) The funny thing is that you are still able to remove the offset-list with named-ACL using a CLI with "no offset-list 0" command, even "1" worked fine. I hope I won't be facing a similar issue during the lab :-)
>
> Here is my config and IOS version if someone is interested:
>
> R2(config-router)#do s run | be router rip
> router rip
> timers basic 10 30 30 40
> passive-interface default
> no passive-interface FastEthernet0/0
> no passive-interface FastEthernet0/1
> offset-list LOOPBACK-ACL out 1
> network 2.0.0.0
> network 10.0.0.0
>
> R2(config-router)#do s ver | i mz
> System image file is "flash:c2600-entservicesk9-mz.124-15.T9.bin"
>
> Have a nice day!
>
> Regards,
> Miroslav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 06 2010 - 17:44:52 ART